Controls and displays

	CAUTION	identifies a dangerous situation
		which, if not obviated, may result in
		minor or medium bodily injury.
	NOTICE	identifies a dangerous situation
		which, if not obviated, may result in
		damage to property.

	Note	identifies useful information and tips.

3 Controls and displays

The following are displayed in normal operation:

-the set cooling temperature

The freezer compartment temperature display flashes:

-the temperature setting is being changed

-after switch-on the temperature is not yet cold enough

-the temperature has risen several degrees

You can change over the door hinges if necessary. Ensure that the following tools are to hand:

q Torx 25

q Torx 15

q Screwdriver

q Cordless screwdriver, if necessary

q Second person for fitting work, if needed

Note

u Remove any food from the door racks before removing the door, so that no food falls out.

Fig. 4

uClose the upper door.

uPull off the cover Fig. 4 (1) forwards and upwards.

uLift off the cover Fig. 4 (2)

CAUTION

Risk of injury if the door tips! u Take good hold of the door. u Set down the door carefully.

u Unscrew the upper turn hinge Fig. 4 (3)(2 Torx 25) Fig. 4 (4) and raise it for removal.

u Lift up the upper door and set it aside.

uClose the lower door.

uDraw the middle bearing pin Fig. 5 (11) out of the turn hinge and lower door.

uRemove the plastic cap Fig. 5 (10).

CAUTION

Risk of injury if the door tips! u Take good hold of the door. u Set down the door carefully.

u Open the lower door.

u Detach the middle turn hinge Fig. 5 (13). u Lift up the door and set it aside.

Fig. 5

uTurn the middle turn hinge Fig. 5 (13) through 180° and screw it firmly into place on the new hinge side (with 4 Nm).

uTurn the cover panel Fig. 5 (12) through 180° and snap it into place again on the new handle side.