Tape measure, Approximately 9 mm | Rangemaster U110120

fig.4-8	5 mm		Fitting the Furniture Door
fig.4-8			If you need the door to open from the other side, then reverse
=		=
		Worktop	the door before fitting the furniture door (see ‘Reversing the
		Worktop	door’).
			Tools required:

5 mm	•	Tape measure
15 mm	•	Tape measure
15 mm	•	Sharp pencil
	•	Sharp pencil
	•	Small flat bladed screwdriver
	•	Spanner
	Procedure
Side view	1.	Undo the 2 screws from the mounting bracket. Remove
		the bracket.
	2.	Measure the width of the furniture door. At the halfway
		point mark a line vertically down the inner surface of
		the furniture door. You should draw the line from the
fig.4-9		top of the furniture door to approximately halfway
fig.4-9		down.
Furniture door		down.
Furniture door	3.	Place the mounting bracket on the reverse of the
	3.	Place the mounting bracket on the reverse of the
Mounting bracket		furniture door (fig.4-8). The middle of the mounting
Adjusting		bracket should be positioned on the line that you have
nuts		just drawn.
		Please note the position of the mounting bracket in
		the drawing – make sure that you have the mounting
9 mm		bracket the correct way up.
9 mm		The top of the mounting bracket should be positioned
		The top of the mounting bracket should be positioned
		approximately 15 mm from the top of the furniture door.
		This will allow a 5 mm gap from the top of the furniture
		door to the underneath of the worktop.
	4.	Mark the position of the 10 fixing	points in the bracket.
		Using the screws supplied, fix the	mounting bracket to
		the furniture door. Fully tighten the screws.
	5.	Hang the furniture door onto the appliance door and
		using the screws supplied, secure in place (fig.4-9).
		Use a suitable spanner to adjust the gap on the lower
		section of the adjusting bolts. The gap should be set to
		approximately 9 mm.
fig.4-10	6.	Fix the lower bracket to the bottom of the furniture door
		and the underneath of the appliance door (fig.4-10).
	7.	It is possible to make minor adjustments to the position
		of the furniture door using the screws on the top and
		the bottom of the appliance door. Adjust the door so
		that it is level.
	8.	Insert the cover trim to the top of the appliance – this
		will slide into the slot in the mounting bracket
		(fig.4-11).
Bracket
Fixing
screw

U110120 - 01A specifications

The Rangemaster U110120 - 01A is an exemplary range cooker that combines advanced technology with traditional craftsmanship to elevate your culinary experience. Designed for home chefs and cooking enthusiasts alike, this model stands out with its blend of aesthetic appeal and functionality.

One of the defining features of the Rangemaster U110120 - 01A is its expansive cooking capacity, which accommodates multiple dishes simultaneously. The unit typically encompasses several ovens, each designed to perform specific cooking functions, from baking and roasting to grilling and slow cooking. This versatility makes it ideal for large families or those who enjoy hosting gatherings.

The Rangemaster employs advanced heating technologies, including multi-function ovens engineered to ensure even heat distribution. This design allows for precise cooking results, making it possible to achieve a perfect bake every time. Additionally, the unit often features a built-in fan, which promotes efficient heat circulation for uniform cooking.

Another standout characteristic of the U110120 - 01A is its powerful hob configuration. With multiple cooking zones, including high-output burners and a wok burner, it offers the flexibility needed for various cooking styles. Users can easily switch between simmering sauces and boiling water, all on a single surface.

Aesthetically, the Rangemaster model is designed to be a focal point in any kitchen. Its elegant finishes, available in a range of stylish colors, ensure it complements diverse interior designs. The attention to detail is reflected in the control knobs, handles, and overall build quality, which exhibits a blend of modern design and classic elements.

Safety features are paramount in the Rangemaster U110120 - 01A, which may include flame failure devices and auto shut-off capabilities. These features provide peace of mind, particularly for busy kitchens where multitasking is common.

In summary, the Rangemaster U110120 - 01A is not just a cooking appliance but a versatile culinary partner. With its rich combination of features, advanced technology, and striking design, this model represents a perfect fusion of style and performance, making it an excellent choice for discerning home chefs. Whether you are preparing daily meals or elaborate feasts, the Rangemaster U110120 - 01A is equipped to meet your culinary needs with ease and sophistication.

Fitting the Furniture Door

Tools required:

Tape measure

Sharp pencil

Small flat bladed screwdriver

Spanner

Procedure

Place the mounting bracket on the reverse of the

furniture door (fig.4-8). The middle of the mounting

bracket should be positioned on the line that you have

This will allow a 5 mm gap from the top of the furniture

door to the underneath of the worktop.

the furniture door. Fully tighten the screws.

Hang the furniture door onto the appliance door and

using the screws supplied, secure in place (fig.4-9).

Use a suitable spanner to adjust the gap on the lower

approximately 9 mm.

and the underneath of the appliance door (fig.4-10).

of the furniture door using the screws on the top and

the bottom of the appliance door. Adjust the door so

U110120 - 01A specifications