RCA RMW1138 owner manual Installation Guide, Grounding Instructions, Electrical Requirements

Page 5
 INSTALLATION GUIDE

 GROUNDING INSTRUCTIONS ELECTRICAL REQUIREMENTS INSTALLATION GUIDE Manual backgroundManual background

 

 

 

 

 

 

 

 

1.

Make sure that all the packing materials

 

5.

For correct operation, the oven must

 

 

 

are removed from the inside of the door.

 

 

have sufficient airflow. Allow 20cm of

 

 

2.

Check the oven for any damage, such

 

 

space above the oven, 10cm at back

 

 

 

as misaligned or bent door, damaged

 

 

and 5cm at both sides. Do not cover or

 

 

 

door seals and sealing surface, broken

 

 

block any openings on the appliance.

 

 

 

or loose door hinges and latches and

 

 

Do not remove feet on which oven

 

 

 

dents inside the cavity or on the door. If

 

 

stands.

 

 

 

there is any damage, do not operate the

 

6.

Do not operate the oven without glass

 

 

 

oven but contact qualified service

 

 

tray, roller support, and shaft in their

 

 

 

personnel.

 

 

proper positions.

 

 

3.

This microwave oven must be placed

 

7.

Make sure that the power supply cord is

 

 

 

on a flat, stable surface to hold its

 

 

undamaged and does not run under the

 

 

 

weight and the heaviest food likely to be

 

 

oven or over any hot or sharp surface.

 

 

 

cooked in the oven.

 

8.

The socket must be readily accessible

 

 

4.

Do not place the oven where heat,

 

 

so that it can be easily unplugged in an

 

 

 

moisture, or high humidity are

 

 

emergency.

 

 

 

generated, or near combustible

 

 

 

 

 

 

materials.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual backgroundManual background GROUNDING INSTRUCTIONS Manual backgroundManual background

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.

WARNING Improper use of the grounding plug can result in a risk of electric shock.

ELECTRICAL REQUIREMENTS

The electrical requirements are a 120 volt 60 Hz, AC only, 20 amp. It is recommended that a separate circuit serving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.

Power Supply Cord

1. A short power supply cord is provided to

reduce the risks resulting from becoming entangled in or tripping over a longer cord.

2.Longer cord sets or extension cords are available and may be used if care is exercised in their use.

3.If long cord or extension cord is used

a)The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

b)The extension cord must be a grounding-type 3-wire cord, and The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over unintentionally.

Notes:

4

Image 5
Contents RMW1138 Microwave OvenCONTENT PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGYIMPORTANT SAFETY INSTRUCTIONS Page ELECTRICAL REQUIREMENTS INSTALLATION GUIDEGROUNDING INSTRUCTIONS 9 RECOMMENDED UTENSILS GUIDEΛ LIMITED USE 8 Not RecommendedSTIRRING COOKING TECHNIQUESARRANGEMENT SHIELDINGPART NAMES SPECIFICATIONSDoor Safety Lock System Oven Window Oven Air Vent Shaft Roller Ring Glass Tray Control PanelCONTROL PANEL SIGNALS DURING OVEN SETTINGS OPERATION INSTRUCTIONSA. One-stage Cooking B. Two-stage CookingCOOK BY WEIGHT Cook By Weight Code DescriptionDEFROST BY WEIGHT Converting Fractions of a Pound to OuncesPOPCORN QUICK COOK SETTINGSPIZZA BEVERAGEREHEAT FROZEN DINNERFor one or two small 7-9 oz. frozen dinners Microwaving one large 10-12 oz. frozenCLEANING AND CARE