Operation Instructions, One-stage Cooking

OPERATION INSTRUCTIONS

SETTING THE CLOCK

1.Touch CLOCK pad.

2.Use the number pads to enter the correct time. You must touch at least three numbers to set the clock (one for hour and two for minutes).

3.Touch CLOCK pad again.

NOTE:

·This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the display will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, touch RESET.

·You can check the clock time while cooking is in progress by touching the CLOCK pad.

SETTING THE OVEN TIMER

1.Touch TIMER.

2.Enter the amount of time by touching the number pads. Digit time is in minutes and seconds and set left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).

3.Touch START/STOP.

NOTE:

·Time countdown can be seen in display for 5 seconds before clock or cooking time is returned to display.

·Touch TIMER and then touch RESET to cancel TIMER during timing process.

SETTING A COOKING PROGRAM

A. One-stage Cooking

1.Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds.

2.If you want to set a power level other than 100% power, touch POWER, then use the

number pads to enter the power level.

3.Touch START/STOP to start cooking. Use single digits to set a cooking power level:

Number pad	Cooking power

1、0	100%

9	90%

8	80%

7	70%

6	60%

5	50%

4	40%

3	30%

2	20%

1	10%

0	0%

B. Two-stage Cooking

Some recipes require different stages of cooking at different temperatures.

1.SET STAGE 1:

Follow steps 1 and 2 in “One-stage Cooking”. DO NOT TOUCH START/STOP

2.SET STAGE 2:

Touch COOK then enter proper cooking time and (lower) power level. (Most 2-stage recipes use lower power for second stage.)

3.Touch START/STOP. NOTE:

·After total time elapsed, the system will sound beeps with END in display. And the beeps will continue to sound every two minutes automatically until the door is opened or any pad is touched.

SPEED DEFROST

1.Touch SPEED DEFROST.

2.Enter desired defrosting time by touching correct number pads.