Cook By Weight Code Description, Defrost By Weight

NOTE:

·After setting SPEED DEFROST, oven can be programmed to automatically switch to one or two-stage cooking.

·For speed defrost and one stage cooking, follow steps above. Before touching START/STOP pad, touch COOK pad, and enter time and power level. Then touch START/STOP pad.

·For speed defrost and two-stage cooking, follow steps above. Before touching START/STOP pad, enter two-stage cooking programs.

COOK BY WEIGHT

1.Touch COOK BY WEIGHT pad.

2.Enter the one digit code by touching the correct number pad (1~3).

3.Enter weight by touching number pads.

4.Touch START/STOP pad.

Cook By Weight Code Description

CODE	TYPE	MAX WEIGHT

1	Beef	5 lb. 16 oz.

2	Mutton	5 lb. 16 oz.

3	Pork	5 lb. 4 oz.

Note:

·Weight must be in pounds and ounces.

·Ounce weights less than 10 must be preceded by a 0. If label gives weight in pounds only, change the fraction of a pound to ounces using the following chart.

Converting Fractions of a Pound to Ounces

Fractions of a pound	Ounces

Less than .03	0

.03 to .09	1

.10 to .15	2

.16 to .21	3

.22 to .27	4

.28 to .34	5

.35 to .40	6

	.41 to .46	7

	.47 to .53	8

	.54 to 59	9

	.60 to .65	10

	.66 to .71	11

	.72 to .78	12

	.79 to .84	13

	.85 to .90	14

	.91 to .97	15

	above .97	go to next
	above .97	even
		even

·During cooking, the system will pause automatically and sound to remind user to turn food over. After that, touch START/STOP pad to resume cooking.

DEFROST BY WEIGHT

1.Touch DEFROST BY WEIGHT pad.

2.Enter weight by touching number pads.

3.Touch START/STOP pad.

NOTE:

·Weight must be in pounds and ounces. Ounce weights less than 10 must be preceded by a 0. If label gives weight in pounds only, change the fraction of a pound to ounces by using the chart given above. The maximum weight is 5lb.16oz.

·During defrosting the system will sound to remind user to turn food over, then touch START/STOP pad to resume defrosting.

SETTING CHILD LOCK

The safety lock prevents unsupervised operation by children.

1.To set, in standby mode, press and hold RESET pad for 3 seconds. Lock indicator will appear on the display.

2.To cancel, in standby mode, press and hold RESET pad for 3 seconds. Lock indicator will disappear.