Peavey 4X specifications Mounting Architectural and Engineering Specifications

Page 3

Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today’s high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available.

Harmonic distortion

Second and third harmonic distortions vs. frequency are plotted in figures 5 and 6 for two power levels. Ten percent (10%) of rated input power and either one percent (1%) of rated input power or one Watt, whichever is greater. Distortion is read from the graph as the difference between the fundamental signal

(frequency response) and the desired harmonic. As an example, a distortion curve that is down 40 dB from the fundamental is equivalent to 1% distortion.

Mounting

Warning: This unit is not designed for overhead suspension

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 51 Hz - 16 kHz. The nominal output level shall be 98.0 dB when measured at a distance of one meter with an input of one Watt. The nominal impedance shall be 4.0 Ohms. The maximum continuous power handling

shall be 1,000 Watts, maximum program power of 2,000 Watts and a peak power input of at least 4,000 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 40 degrees in the vertical plane. The outside dimensions shall be 49.00 inches high by

21.00inches wide by 22.75 inches deep. The weight shall be 125 pounds. The loudspeaker system shall be a Peavey model SP 4X.

This product is manufactured under U.S. Patent 6,064,745.

Harmonic Distortion : 10% Rated Power

 

120

 

 

 

 

 

 

 

 

 

 

110

 

 

 

 

 

 

 

 

 

Pa)

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

90

 

 

 

 

 

 

 

 

 

(re

80

 

 

 

 

 

 

 

 

 

dB SPL

 

 

 

 

 

 

 

 

 

70

 

 

 

 

 

 

 

 

 

 

60

 

 

 

 

 

 

 

 

 

 

50

50

100

200

500

1k

2k

5k

10k

20k

 

20

 

 

 

 

 

Frequency (Hz)

 

 

 

 

 

2nd Harmonic

Figure 3

3rd Harmonic

 

Harmonic Distortion : 1% Rated Power

 

110

 

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

Pa)

90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

80

 

 

 

 

 

 

 

 

 

(re

70

 

 

 

 

 

 

 

 

 

dB SPL

 

 

 

 

 

 

 

 

 

60

 

 

 

 

 

 

 

 

 

 

50

 

 

 

 

 

 

 

 

 

 

40

50

100

200

500

1k

2k

5k

10k

20k

 

20

 

 

 

 

 

Frequency (Hz)

 

 

 

 

 

2nd Harmonic

Figure 4

3rd Harmonic

 

Image 3
Contents Sound pressure level, 1 Watt Meter in anechoic environment Power handlingBox tuning frequency Usable low frequency limit -10 dB pointHigh frequency Dimensions H x W x DNet Weight FeaturesMounting Architectural and Engineering Specifications SP 4X Input