Rangemaster RI77 manual Customer Care, To comply with the relevant Institute of Electrical

INSTALLATION

Check the appliance is electrically safe when you have finished.

Fig.5-4

�������

Secure the hob to the worktop using the brackets supplied. ��� The positioning of the bracket (and sleeve) is dependent on

the thickness of the worktop as shown in (Fig.5-4).

�����	Note: Slide the optional sleeve onto the bracket if fitting to
	thin work surfaces.

	Locate the bracket to the slot on the hob base and then
������	tighten the retaining screw until it is locked to the worktop.

�������	���������	Electrical Connections
	�����	This appliance must be installed by a qualified electrician
		to comply with the relevant Institute of Electrical
		Engineers (I.E.E.) regulations and also the local electricity

��� supply company requirements.

�������

�����

�������			���������
			�����
Fig.5-5	�	�	��

�����

WARNING: THIS APPLIANCE MUST BE EARTHED

Note: All external wiring must comply with the IEE Regulations for the Electrical Equipment of Buildings. Connection to the electrical supply can be made with either a plug and socket, or be permanently wired via a double pole switch.

The electrical cable to be fitted must be 250V high temperature PVC (85°C), 2.5mm² minimum conductor size.

Connect the hob up as shown in Fig.5-5and Fig.5-6.

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Green and yellow:	Earth
Blue:	Neutral
Brown:	Live

ArtNo.130-0008 - Electrical connections Induction hob Hob Check

Check each cooking zone in turn.

��� �� ��

Customer Care

Please complete your contact details in the front of this section. Please inform the user how to operate the hob and hand over the instruction pack.

��������		Thank you.
Fig.5-6	400V 2N	H05RR-F4x2.5

2 4

1 3 5

L1 L2 N

ArtNo.314-0010 Induction electrical label

230V H05RR-F3x2.5

2 4

1 3 5

L N

12