Rangemaster RG70 Checking the Parts, Positioning the Hob, You will also need the following tools

Page 11

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

You will need the following equipment to complete the hob installation satisfactorily:

Gas Pressure tester

Flexible gas hose

Multimeter

You will also need the following tools:

���

Fig.5-1

������

�����

���������������

��������������

1.Electric drill

2.Jigsaw

3.Steel tape measure

4.Cross head screwdriver

5.Pencil

6.Adjustable spanner

7.Sharp knife

Checking the Parts

Check that the appliance is in a good condition after having removed the packaging. In case of doubt, do not use the appliance and contact the retailer.

The hob also has 3 pan supports.

Never leave the packaging materials (cardboard, plastic bags, polystyrene foam, etc.) within children’s reach since they could become potential sources of danger.

Positioning the Hob

The hob should be fitted into a work surface, which is at least 600mm deep. In position, the hob has a maximum thickness of 50mm from the top of the work surface, and an overall thickness of 100mm (120mm max depth including the gas connector). The cut-out dimensions are shown in (Fig.5-1), and the minimum clearances in (Fig.5-2).

It is recommended that the hob be installed in a worktop with a minimum thickness of 40mm.

Note: If installing the hob over a standard cabinet, you may have to remove part of the cabinet panels to allow the unit to fit correctly (see Fig.5-1).

It is recommended that there is a minimum air gap of 100cm² underneath the hob to allow sufficient air circulation to the unit.

�������������������������

������

��������������������������

���

ArtNo.316-0028 - RGG77 cut-out dimensions

���������Fig.5-2

��������

����

���

Fig.5-3

���������

If installing a built-in oven directly under the hob then there should be a minimum air gap of 20mm between the oven and the bottom of the hob. Failure to maintain a suitable clearance may impair the performance of the hob.

Any hob hood should be installed in accordance with the hood manufacturer’s instructions.

Surfaces of furniture and walls at the sides and rear of the hob should be heat, splash and steam resistant. Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage and discolouration.

We cannot accept responsibility for damage caused by normal use of the hob to any material that de-laminates or discolours at temperatures less than 65°C above room temperature.

ArtNo.316-0014 RG60 hob clearances

�����

�����

���

���

9

Image 11
Contents RG70 Contents Before You Start Cleaning DocNo.021-0002 Overview RG70 gas Hob OverviewHob Care Triple Ring burnerHotplate Burners Cleaning Your HobEssential information Cleaning the hotplate Cleaning TableHotplate ignition or hotplate burners faulty TroubleshootingLocation of the Hob InstallationDear Installer Provision of VentilationYou will also need the following tools Checking the PartsPositioning the Hob Gas Connection Pressure TestingSafety Information Conversion to LPThank you Electrical ConnectionsHotplate checks Customer CareAffix Label Tap AdjustmentConversion to LPG Gas InjectorsCircuit Diagram Ratings Technical DataDimensions ConnectionsWarranty/After Sales Service Page Page DocNo.000-0001 Back cover Rangemaster

RG70 specifications

The Rangemaster RG70 is an exemplary double oven range cooker that stands out for its combination of style, functionality, and advanced cooking technology. Designed for the modern kitchen, it seamlessly combines traditional craftsmanship with contemporary features, making it an ideal choice for cooking enthusiasts and professional chefs alike.

One of the primary highlights of the RG70 is its robust dual fuel system. This range cooker utilizes gas burners for precise temperature control while offering an electric oven for even heat distribution. This combination allows cooks to enjoy the best of both worlds, delivering the responsiveness of gas cooking alongside the consistency of electric baking.

The RG70 features a spacious 70cm width, which makes it suitable for a variety of kitchen layouts. Accommodating multiple dishes at once, the oven capacity is ample, enabling the preparation of large meals for family gatherings or dinner parties. The main oven offers a generous cooking space and includes five cooking functions, including fan-assisted cooking, which ensures that heat is evenly circulated. This results in perfectly cooked dishes every time.

Another notable feature is the inclusion of a separate electric grill, allowing for versatile cooking options. The grill compartment is perfect for achieving that golden crust on meats or vegetables, providing an additional layer of culinary flexibility.

User-friendly controls are a defining characteristic of the RG70. The intuitive dials and illuminated oven indicators make it easy to navigate settings and monitor cooking progress. Safety features are also prioritized, with a flame failure safety device that automatically cuts off the gas supply if the flame goes out, ensuring a safer cooking environment.

The RG70’s aesthetic value cannot be overlooked. Available in a range of traditional and modern colors, it is designed to fit a variety of kitchen styles. The stainless steel finish offers durability while adding a touch of elegance.

In terms of cleanliness, the RG70 is equipped with easy-clean enamel ovens that make maintenance a breeze. Additionally, the range cooker features removable oven racks and trays, enhancing its practicality.

Overall, the Rangemaster RG70 remarkably combines functionality with style, showcasing advanced technology, ample cooking capacity, and safety features that make it a standout choice for any kitchen. Whether you're a seasoned home chef or just starting your culinary journey, the RG70 is built to meet your cooking needs with excellence.