Perlick CS1DPSP specifications General Information Single Door Back Bar Cooler

Page 4

General Information – Single Door Back Bar Cooler

Refrigeration and Temperature Control

The Back Bar cabinet is equipped with a heavy- duty refrigeration system designed to automatically maintain a storage temperature of 36-41 degrees F. The control is factory set at 38 degrees F.

Cleaning the Cabinet

Use a mild detergent and water to clean the inside and outside of the cabinet. Dry thoroughly. Never use a scouring pad or abrasive cleanser.

NOTE: An industrial strength, commercial cleaner can be used to clean the outside of painted cabinets.

Adjusting the temperature

The temperature control is inside the cabinet on the right-hand side of the evaporator fan panel assembly. You will need a screwdriver to turn the adjusting screw. Make small adjustments until the desired temperature is achieved.

Colder Temperatures:

Turn the adjusting screw clockwise (to the right).

Warmer Temperatures:

Turn the adjusting screw counterclockwise (to the left).

In normal operation the condensing unit will run approximately 16 hours per day. The condenser fan motor turns off and on with the condensing unit. The evaporator fan motor runs continuously. The fan motors are lifetime lubricated and will require no oiling.

NOTE:

Cabinet Temperatures lower than 34° will not allow for proper defrosting of the evaporator coil. If defrosting is necessary, turn the control knob to the OFF position until coil is defrosted.

Cleaning the Condenser

Use a long handled, stiff brush to clean the dirt from the front surface of the condenser. Keeping the condenser free from dust and dirt will ensure effi- cient operation.

CAUTION: Do not bend the fins while brushing the front of the condenser.

Condenser

The condenser (located behind the back cover) should be inspected every 30 days and cleaned, if necessary. Failure to keep the condenser clean will cause a loss in condenser unit efficiency.

 

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

Form No. Z2091A

4

Rev. 08.03.04

Image 4
Contents Model NOS Installation and Operating Instructions Preparing the Cabinet for Use Single Door Back Bar Cooler General Information Single Door Back Bar Cooler Replacement Parts Single Door Back Bar Cooler Wiring Diagram Single Door Back Bar Cooler

CS1DPSP specifications

The Perlick CS1DPSP is a state-of-the-art beverage dispensing system that epitomizes innovation and quality in the world of draft beer service. Designed primarily for commercial environments, it brings forth a combination of functionality, durability, and aesthetic appeal, making it an ideal choice for bars, restaurants, and event spaces.

One of the standout features of the CS1DPSP is its capacity for high product output. This model is tailored for those who demand efficiency and speed in service, capable of dispensing multiple beverages simultaneously. The engineered system allows for precise temperature control, ensuring that every pour maintains the optimal carbonation and serves at the ideal temperature. This commitment to quality not only enhances the drinking experience but also promotes customer satisfaction.

Another significant aspect of the CS1DPSP is its advanced cooling technology. The unit is equipped with a powerful refrigeration system that circulates chilled glycol through the lines, keeping beverages cold all the way to the tap. This technology minimizes temperature fluctuations, resulting in consistent performance, which is particularly important during peak service times.

The construction of the Perlick CS1DPSP emphasizes durability, utilizing high-quality stainless steel that resists corrosion and wear, thereby prolonging its lifespan. The well-thought-out design includes easy-to-clean surfaces that facilitate quick maintenance, which is crucial in busy environments where downtime must be minimized.

Additionally, the CS1DPSP features customizable tap configurations, allowing establishments to tailor their beverage offerings according to customer preferences. Whether it's craft beers, ciders, or kombucha, the flexibility of the dispense options caters to a diverse clientele.

Ergonomics plays a vital role in the design of the CS1DPSP, as it is engineered to reduce strain on bartenders during service. The height-adjusted feature ensures that users can serve comfortably while maintaining an efficient workflow.

In terms of aesthetics, the sleek design of the CS1DPSP enhances the visual appeal of any bar setup, making it not just a functional piece of equipment but also a stylish addition to the environment.

In summary, the Perlick CS1DPSP stands out as a premier choice for businesses looking to elevate their beverage service. With its combination of high output capacity, advanced cooling technology, durable materials, ergonomic design, and customizable options, it is tailored to meet the demands of modern establishments, ensuring that every pour is as excellent as the last. This model not only supports a thriving beverage program but also contributes to a memorable customer experience.