Hoover HF155-80 manual Dishwasher installation steps, Aesthetic panel

Page 20

●Dishwasher installation steps

1Install the aesthetic pannel on the outer door of the dishwasher.

2 Adjust the tension of door spring.

3 Connect the inlet, and drain hoses, and power cord .

4 Putthe dishwasher on slide-rails.

5 Push the dishwasher into the cabnet.

6 Level the dishwahser and touch the cabinet by adjusting the four leveling legs individually.

Please adjust the height of left and right feet gradually.Don't let the machine incline too much.

7Fixi the dishwasher into the cabinet by two countersunk head screw.

According to the arrow illustrated figure 7, adjust the feet to rise or low down the dishwasher and keep it level.

2

6

1

6

5

3

Aesthetic panel

【Figure 7】

Installation steps

5

Image 20

Contents HFI55-80 Before calling for service „ Do not tamper with controls Program indicator lightwhen you select washing Bouton is pressed downCup Shelf Silverware BasketNormal That are to be washed straightSelector Auto nomy~10 10~25 25~50If only four settings we suggest you set on Page Serving spoon Fuses or trip circuit breaker Inlet pipe from the water valveUse a pan to catch the water Reconnect the water inlet pipe to the water valvePage For the connection to the cold water line Fastened tightly in placeEfficiency slightly reduced Power supply is not Fuse blown, orCircuit breaker acted Turned on Closed securelyDetergent Tea or coffee stains To remove the stains by handWill happen Iron deposits in waterHFI55-80 Installation preparation Installation instruction Aesthetic panels dimensions and installation 390 418 175 179 445【 a】 Tension adjustment of the door spring Connection of drain hosesDishwasher installation steps Aesthetic panelTo Back Start of dishwasherFront