Fitting a new plug
IMPORTANT: |
|
|
WIRES IN THE MAINS LEAD ARE COLOURED IN | ||
| ACCORDANCE WITH THE | |
| FOLLOWING CODE... |
|
| Green and Yellow | - Earth |
| Blue | - Neutral |
Brown | - Live |
|
Reversible doors
GB
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
-Connect Green and Yellow wire to terminal marked ‘E’ or coloured Green and Yellow.
-Connect Brown wire to terminal marked ‘L’ or coloured red or brown.
-Connect Blue wire to terminal marked ‘N’ or coloured Black or Blue.
If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.
If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.
CE Marking certifies that this appliance conforms to the following EEC directives :
Low Voltage Equipment - 73/23/EEC & 93/68 EEC
Electromagnetic Compatibility 89/336/EEC, 92/31/ EEC & 93/68/EE
∅2mm
3