GB Instruction on Mounting and USE

Consult the designs in the front pages referenced in the text by alphabet letters. Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined.

Installation

The cooker hood must be placed at a minimum distance of 60 cm from the cooking plane for electric cookers and 70cm for gas or mixed cookers.

If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

Do not tile, grout or silicone this appliance to the wall. Surface mounting only.

Do not fix chimney flue to furniture or fly over shelves unless the chimney flue can be easily removed, in case maintenance is ever required.

Use

The cooker hood is provided with an upper air exit B for discharging fumes externally for models including chimney flue C ( Suction Version - exhaust pipe 13 not supplied).

In the instance where it is not possible to discharge cooking fumes and vapours externally even if utilising the model with chimney flue C, the cooker hood may be used in the filter version F by mounting two active carbon filters E, the fumes and vapours are then recycled via the upper grill G .

Electrical connection

The electrical tension must correspond to the tension noted on the label placed inside the cooker hood. Connect the electrical plug, where provided, to the an easily accessible outlet in conformity with local standards in force.

Where an electrical plug is not provided (for direct connection to electrical network) place a standards approved bipolar switch with an aperture distance of not less than 3mm (accessible) from the contacts.

Operation

The cooker hood is provided with a key or pushbutton control panel situated of the frontal part of the cooker hood, depending on the basis of the cooker hood type in possession. For proper operation consult the text below and the relative illustration:

a. ON/OFF lighting b. OFF motors

c. - d. - e. Minimum suction power (c.), medium (d.), maximum (e.). f. Operation warning light.

f a b-c d e

Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.

Maintenance

Prior to any maintenance operation ensure that the cooker hood is disconnected from the electrical outlet.

Cleaning

The cooker hood should be cleaned regularly internally and externally. For cleaning use a cloth moistened with denatured alcohol or neutral liquid detergents. Avoid abrasive detergents.

Warning:

Failure to carry out the basic standards of the cleaning of the cooker hood and replacement of the filters may cause fire risks. Therefore we recommend oserving these instructions.

Anti-grease Filter –

If situated inside the support grill, it may be one of the following types: Metallic filter must be cleaned once a month, with non abrasive detergents, by hand or in dishwasher on low temperature and short cycle.

To obtain access to the grease filter J open the grill K via the hooks L and free the grill from the stoppers M.

Some models are provided with a metal filter N without support grill, this filter should be washed as instructions noted for metallic filter above and is removed from its placing by pushing the handles O towards the back and sliding the filter N downwards.

When washed in a dish-washer, the grease filter may discolour slightly, but this does not affect its filtering capacity.

Carbon Filter

(2 pieces – only for filter version)

The active carbon filters E are not washable nor regenerative. It should be changed every 6 months in normal use.

The active carbon filters capture unpleasant cooking odours. Apply one on each side covering both grills protecting the motor propeller, then turn the filter central handles P clockwise.

In order to dismantle turn the central handle P anti-clockwise for each filter.

Replacing lightbulbs

Remove the anti-grease filter support grill or the anti-grease filter to attain access to the lightbulb area. Remove the damaged lightbulb and replace with an incandescent oval bulb max. 40W E14.

Caution

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance. Do not use the cooker hood where the grill is not correctly fixed! The suctioned air must not be conveyed in the same channel used for fumes discharged by appliances powered by other than electricity. The environment must always be adequately aerated when the cooker hood and other appliances powered by other than electricity are used at the same time. Flambé cooking with a cooker hood is prohibited. The use of a free flame is damaging to the filters and may cause fire accidents, therefore free flame cooking must be avoided. Frying of foods must be kept under close control in order to avoid overheatedoilcatchingfire.Carryoutfumesdischarginginaccordance with the regulations in force by local laws for safety and technical restrictions.

LI178D specifications

The Indesit LI178D is a reliable and efficient refrigerator that combines modern technology with user-friendly features, making it an excellent choice for any household. With its spacious interior and smart design, it perfectly meets the demands of everyday life.

One of the standout features of the LI178D is its ample storage capacity, providing a total net volume of around 250 liters. This allows users to store a significant amount of groceries, including large items like pizzas or tall bottles, without any hassle. The refrigerator is designed with adjustable shelves, which offers flexibility to accommodate different sizes and types of food items. Moreover, it comes with a dedicated fruit and vegetable drawer, ensuring that your produce stays fresh and easily accessible.

Another notable characteristic of the Indesit LI178D is its energy efficiency. Rated with an A+ energy class, this refrigerator helps in reducing electricity consumption, which not only saves money on energy bills but also minimizes environmental impact. The appliance operates quietly, making it ideal for open-plan living spaces or homes where noise might be a concern.

The LI178D incorporates advanced cooling technology, ensuring consistent temperature levels throughout the fridge. This prevents temperature fluctuations, which can lead to spoilage or freezer burn. The multi-air flow system is designed to enhance air circulation, ensuring that every item stored receives equal cooling, thereby prolonging the freshness of your food.

Safety features are also a priority with the Indesit LI178D. The appliance is built with a strong and durable exterior, and the shelves are made from toughened glass, providing a sturdy surface for heavy items. Additionally, the refrigerator is equipped with a reversible door, allowing homeowners to customize their kitchen layout as needed.

Convenience is further enhanced by the user-friendly control panel, which allows for easy adjustments to temperature settings. The LED lighting inside the fridge provides bright and efficient illumination, making it easy to find what you need, even in low light conditions.

In summary, the Indesit LI178D is a well-rounded refrigerator that offers a combination of spaciousness, energy efficiency, and advanced cooling technology. With its thoughtful design and practicality, it is a perfect addition to any modern kitchen, catering to the needs of families and individuals alike. Whether it's for daily use or special occasions, the LI178D is built to handle it all.