BlueAnt Wireless none manual Multi-Pairing / Switching Connections between Phones

down on one of the Interphones until you hear the second beep, then both units will resume intercom mode.

3.During intercom mode, the ring of the phone will not be transferred to the BLUEANT INTERPHONE automatically. (Tip: Switch on your phone’s vibrate option to notice an incoming call.)

4.On an incoming call, Press the MFB(1) for 1 second to transfer the call to your headset. Some phones may require 2 times press on MFB(1) in order to answer an incoming phone call from intercom mode (1st press to transfer the call to the headset, 2nd press to answer the call).

Multi-Pairing / Switching Connections between Phones

The BLUEANT INTERPHONE can be paired to 5 different Bluetooth phones. An additional pairing will automatically delete the phone that has not been used for the longest time. Thus, maintaining 5 phones in its memory.

You can easily switch to any of the paired phones by:

1.Disconnecting the currently used phone using the “Active devices” in the Bluetooth menu of that phone.

2.Connect to the wanted phone by using the “Paired devices” in the Bluetooth menu of that wanted phone.

Note: Reconnection to a paired phone can also be done by pressing the MFB(1). But when you press the MFB(1), the BLUEANT INTERPHONE will attempt to connect to the last used phone only. So it is recommended to connect to another paired phone using the phone’s menu.

12