Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

This dishwasher model can be built under a single worktop (please read the relevant instruction sheet).

Anti-flooding protection

Your dishwasher is provided with a special system which blocks the water supply in the event of leaks inside the appliance.

Cold water connection.

This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Do not use a different hose. In the event of replacements, use original spare parts only.

Connect the cold water supply hose to a 3/4 gas threaded connection, taking care to screw it tightly onto the tap.

If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection

Fit the drain pipe into a drain line with a minimum diameter of 4 cm or place it over the sink.

Avoid restricting or bending it.				A
Avoid restricting or bending it.
Use the special plastic elbow
provided (see figure) to position
it in the best possible way. The
part of the pipe marked with the
letter A should be between 40
letter A should be between 40
and 100 cm above the ground.
and 100 cm above the ground.
The pipe should not be
immersed in water.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

Caution: the dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely.

IDL550 specifications

The Indesit IDL550 is a top-notch integrated dishwasher designed to meet the demands of busy households while ensuring excellent cleaning results. With its space-saving design and advanced features, the IDL550 seamlessly blends into your kitchen cabinetry, providing an aesthetic appeal as well as functionality.

One of the standout features of the Indesit IDL550 is its impressive capacity. With the ability to accommodate up to 13 place settings, it is ideal for families or anyone who frequently entertains guests. This roomy design allows you to wash large loads in a single cycle, making it a time-efficient option for users.

The dishwasher is equipped with a variety of wash programs tailored for different cleaning needs. The most notable is the Eco program, which is designed to minimize water and energy consumption while still delivering optimal cleaning performance. This feature is complemented by the IDL550's A+ energy rating, making it an environmentally friendly choice that helps reduce utility bills.

In terms of technology, the Indesit IDL550 incorporates a Rapid Wash function that allows users to clean lightly soiled dishes in just 30 minutes, perfect for those times when you need clean dishes in a hurry. Moreover, its innovative sensor-based technology adjusts the washing parameters according to the load, ensuring that you get the best results regardless of the amount or type of dirty dishes.

The adjustable upper rack provides flexibility in loading, enabling users to fit taller items such as pots and pans with ease. Additionally, the dedicated cutlery tray improves organization and enhances cleaning efficiency by ensuring that all utensils receive thorough coverage.

For added convenience, the IDL550 features a delay start option, allowing you to select a wash cycle to start later in the day or night, accommodating your schedule and making the most of off-peak energy rates. The machine also operates quietly, at around 49 dB, ensuring minimal disruption while in use.

With its combination of functionality, efficiency, and appealing design, the Indesit IDL550 dishwasher stands out as a reliable choice for anyone seeking an integrated washing solution that simplifies the dishwashing process while saving time and energy.