Indesit SDW80, SDW85 manual Installation

Page 6

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is provided with water supply and drain hoses, which can be directed towards the left or right to facilitate appropriate installation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclined more than 2 degrees. If the appliance is level, it will help ensure its correct operation.

Cold water connection. Connect the cold water supply hose, and making sure that it is fastened tightly in place. If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher.

Anti-flooding protection Your dishwasher is provided with a special system which blocks the water supply in the event of leaks inside the appliance.

Connect to the Water

Supply...

- For your dishwasher to ope- rate correctly it requires water pressures in the range of 6-150 psi (100-1000KPa). Most cold water supplies will be in this range. NOTE: low water pressure will lead to excessively long fill times or no fill.

-Ensure that the new hose supplied is connected and the old hose is disposed of safely.

-Ensure the fill hose is only fitted to the cold water

supply. DO NOT overtighten the hose connector, hand tight is sufficient.

-Ensure the fill hose is not kinked.

-Tap connections (if applicable): A range of adaptors are available to suit your tap.

-DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Drain hose connection.

WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains.

IMPORTANT: For the correct

operation of your dishwasher, it is essential to comply with the following information:

Standpipe:

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with ‘retaining flaps’, ensure they are inserted fully into the standpipe. This will prevent the pipe from jumping out during installation and use.

DO NOT position the standpipe near an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in the diagram.

The standpipe should have a bore of at least 38mm (11/ 2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your household sink.

It MUST NOT be connected to a surface water drain.

Sink Waste System: For under sink drainage: Before connecting the drain hose, remove any internal restrictions - This will prevent a build up of debris which could cause a blockage.

Remove any restrictions from the waste spigot and ensure that the sealing bung is removed. The hose should be routed, such that it is raised to a minimum height of 800mm (31/2”).

NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm.

1.Untie the end of the GREY drainage hose from the rear of the appliance.

2.Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

3.If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Remember you will be charges for a service call is a problem with your appliance is caused by incorrect installation or misuse.

6

Image 6
Contents Instructions for Installation and Use 150950-4 Contents Electrical Connection FusesFor your Safety Mains plug must be easily accessible after installationInstallation To insert or built-in under the one worktop Before Using your Dishwasher Rinse aidSalt Loading your Dishwasher Getting to know your Dishwasher ControlsHow to use your Dishwasher Programme Chart IntensiveCare and Cleaning Troubleshooting Resolving minor problems yourselfInformation for Test Labs Repair Service and Information Help Desk Genuine Parts and AccessoriesUK 08709 077Extended Warranties Satisfaction guaranteed or your money back Guarantee terms and conditions150950-4 19504644404 Repair Service and Information DeskGenuine Parts and Accessories September

SDW85, SDW80 specifications

The Indesit SDW80 and SDW85 dishwashers represent a blend of efficiency, practicality, and modern design perfect for those seeking reliable kitchen appliances. Both models share many core features while catering to slightly different user demands.

One of the standout characteristics of the Indesit SDW80 and SDW85 is their energy efficiency. With an impressive energy rating, these dishwashers help consumers save on energy costs while being environmentally friendly. This aligns with increasingly important global sustainability trends, making them ideal choices for eco-conscious households.

Both models feature a large capacity that accommodates up to 13 place settings, making them perfect for families or those who enjoy entertaining. The spacious interior design ensures that you can efficiently wash larger pots, pans, and a variety of dinnerware in a single cycle.

The Indesit SDW80 and SDW85 come equipped with multiple wash programs that cater to the diverse needs of users, from quick washes for lightly soiled dishes to intensive cycles for heavily soiled cookware. The Quick Wash option is particularly beneficial for those in a hurry, cleaning dishes in as little as 30 minutes, which is excellent for busy lifestyles.

In terms of technology, both models incorporate the "AquaStop" feature, ensuring that water is only released when necessary, thus preventing water waste and potential leaks. Additionally, the adjustable upper rack provides flexibility to load taller items without compromising space, enhancing the overall usability.

Another significant aspect is the noise level; Indesit has designed these dishwashers with silent operation in mind, ensuring that they run quietly in the background, making them suitable for open-plan living spaces.

The stylish exterior of the Indesit SDW80 and SDW85, available in a sleek white or stainless steel finish, can seamlessly integrate into various kitchen designs. The user-friendly control panel enhances overall usability, allowing users to select programs and adjust settings with ease.

Overall, the Indesit SDW80 and SDW85 dishwashers combine innovative features with practicality, making them excellent options for anyone looking to streamline their dishwashing experience while maintaining high standards of cleanliness and efficiency. With their advanced technologies and user-centric designs, they promise to enhance your kitchen experience significantly.