Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

This dishwasher model can be built under a single worktop (please read the relevant instruction sheet).

Cold Water Connection

This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Do not use a different hose. In the event of replacements, use original spare parts only.

Connect the cold water supply hose to a threaded 3/4 (gas) connector and making sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection
Fit the drain pipe into a drain
					A
line with a minimum diameter
of 4 cm or place it over the
sink. Avoid restricting or
bending it. Use the special
plastic elbow provided (see fi-
gure) to position it in the best

possible way. The part of the
pipe marked with the letter A
should be between 40 and 100

cm above the ground.
The pipe should not be immersed in water.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

Caution: the dishwasher plug must be accessible so that maintenance can be done safely.

IDL 40 specifications

The Indesit IDL 40 is a robust and efficient undercounter dishwasher that caters perfectly to the needs of small to medium-sized households. With its compact design and adept functionalities, it proves to be a valuable addition to any kitchen space. This model stands out not just for its size, but also for its impressive features and technologies that enhance its usability.

One of the main highlights of the IDL 40 is its capacity. It can accommodate up to 10 place settings, which makes it ideal for families or those who frequently entertain guests. This capacity allows users to wash a significant amount of dishes in one go, ensuring that users can spend less time cleaning and more time enjoying their meals.

The Indesit IDL 40 boasts multiple wash programs tailored to different types of loads. Among these options are Heavy, Eco, Quick, and Pre-Rinse cycles. The Heavy cycle is specifically designed for heavily soiled pots and pans, while the Eco setting optimizes energy and water usage without compromising cleaning performance. The Quick program allows users to run a fast cycle for lightly soiled dishes, making it convenient for those with a busy lifestyle.

One of the standout technologies featured in the IDL 40 is its Intelligent Wash system. This innovation allows the dishwasher to automatically adjust the temperature and water usage based on the load, ensuring optimal cleaning while conserving resources. This efficiency not only contributes to lower utility bills but also minimizes the environmental impact.

Additionally, the IDL 40 is designed with user convenience in mind. The adjustable top basket allows for varying dish sizes, accommodating taller items when necessary. The dishwasher is equipped with a delay timer, enabling users to set it to run at a more convenient time, whether during off-peak hours or while the household is asleep.

The noise level of the Indesit IDL 40 is notably low, operating at around 49 decibels, which makes it a quiet option for kitchens where peace and tranquility are prioritized. Furthermore, the dishwasher features an A+ energy rating, signifying its efficiency and effectiveness in conserving electricity while delivering outstanding cleaning results.

In conclusion, the Indesit IDL 40 combines practicality with advanced technology, making it a top choice for anyone seeking a reliable and efficient dishwasher. With its array of features and user-friendly design, it simplifies the dishwashing process and enhances the overall kitchen experience.