Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

This dishwasher model can be built under a single worktop (please read the relevant instruction sheet).

Cold Water Connection

This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Do not use a different hose. In the event of replacements, use original spare parts only.

Connect the cold water supply hose to a threaded 3/4 (gas) connector and making sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection

Fit the drain pipe into a drain					A
line with a minimum diameter
of 4 cm or place it over the
sink. Avoid restricting or
bending it. Use the special
plastic elbow provided (see fi-
gure) to position it in the best

possible way. The part of the
pipe marked with the letter A
should be between 40 and 100

cm above the ground.
The pipe should not be immersed in water.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

The plug

The dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely.

IDE 1005, IDE 1000 specifications

The Indesit IDE 1000 and IDE 1005 are part of Indesit's acclaimed line of appliances, designed to deliver efficiency and convenience to the user. These washing machines stand out for their robust performance, user-friendly interfaces, and advanced technologies that make laundry tasks simpler and more effective.

The IDE 1000 model boasts a capacity of 5 kg, allowing users to wash a significant amount of laundry in one go. It operates at a maximum spin speed of 1000 RPM, helping to extract the most water possible from clothes, which subsequently reduces drying time. This model features several wash programs, including those catered specifically for cotton, synthetics, and delicate fabrics. The selection knob allows users to easily navigate between options, ensuring they can choose the best program for their laundry needs.

On the other hand, the Indesit IDE 1005 takes it a step further with an upgraded spinning capacity of 1050 RPM and a slightly larger washing capacity of 6 kg. This makes it an excellent choice for families or users with larger laundry requirements. The IDE 1005 sports similar feature sets as the IDE 1000 but includes additional wash programs, such as a quick wash option that lets users clean clothes in just 30 minutes. Both models are designed with simplicity in mind, featuring intuitive controls that make operation straightforward for users of all ages.

In terms of technology, both models incorporate Indesit's innovative Water Balance Technology, which adjusts water consumption based on the load size, thus promoting energy and water efficiency. This not only helps lower utility bills but also lessens environmental impact, aligning with eco-conscious consumer values.

Additionally, the Indesit IDE series features a delay start function, allowing users to set the machine to begin washing at a later time. This is particularly useful for scheduling laundry during off-peak hours or ensuring freshly washed clothes are ready at a specific time.

Overall, the Indesit IDE 1000 and IDE 1005 models are reliable washing machines, packed with practical features and technologies that cater to a variety of laundry needs. Their combination of efficiency, performance, and user-friendly design makes them excellent choices for anyone seeking an effective laundry solution.