Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) connector.

If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60°C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection

Fit the drain pipe into a drain line with a minimum diameter of 4 cm or place it over the sink. Avoid restricting or bending it. Use the special plastic elbow provided (see figure) to position it in the best possible way. The part of the pipe marked with the letter A should be between 40 and 100 cm above the ground.

The pipe should not be immersed in water.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Caution: the dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

Condensation-proof tape.

On some models, a transparent condensation-proof adhesive tape has been provided.

It should be stuck onto the lower side of your wooden worktop to protect it from the formation of condensation.

When not provided, this tape can be requested as a spare part from authorised retailers.

DI 620 specifications

The Indesit DI 620 is a highly efficient built-in dishwasher designed to meet the needs of modern households. This appliance combines functionality, technology, and stylish design, making it a perfect addition to any kitchen. With its impressive capacity and range of features, the DI 620 is engineered to provide superior cleaning performance while being environmentally friendly.

One of the standout characteristics of the Indesit DI 620 is its ability to accommodate up to 13 place settings. This makes it an ideal choice for families or those who frequently entertain guests. The flexible interior layout allows users to easily adjust the racks and tines to fit various dishware sizes, ensuring that everything from large pots to delicate glassware is perfectly clean.

The DI 620 boasts multiple wash programs tailored to different cleaning needs. Whether you have lightly soiled dishes or heavily soiled pots and pans, this dishwasher offers specific cycles such as Intensive, Eco, and Rapid programs. The Eco wash cycle is particularly impressive, as it maximizes energy efficiency without compromising on cleaning performance. This feature aligns with modern sustainability practices and gives peace of mind to environmentally conscious consumers.

Equipped with several innovative technologies, the Indesit DI 620 includes features like the Softener, which ensures spot-free drying by using the optimal amount of rinse aid. The dedicated Xtra Dry option enhances drying results, making it ideal for plastic items. Additionally, the dishwasher includes a delayed start function, allowing users to set it to run at a more convenient time, whether that be during off-peak hours or while out of the house.

For added convenience, the DI 620 operates quietly, with noise levels as low as 49 decibels, making it suitable for open-plan living spaces where noise can be a concern. Its built-in design integrates seamlessly into kitchen cabinetry for a streamlined appearance.

In terms of energy efficiency, the Indesit DI 620 is rated A+, which signifies reduced energy consumption while delivering robust cleaning performance. Its intelligent water management system also helps conserve water, using only the necessary amount per cycle.

In summary, the Indesit DI 620 is a feature-rich, efficient, and stylish dishwasher that caters perfectly to the demands of any household. Its blend of flexible loading options, multiple wash cycles, and eco-friendly technology ensures impeccable cleaning results.