Indesit IDS 105 manual Troubleshooting

Page 12

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for EN Assistance.

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

cannot be controlled

approximately one minute and reset the program.

 

• The appliance has not been plugged in properly.

 

• The dishwasher door has not been shut properly.

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

dishwasher.

• The water inlet hose is bent (see Installation).

 

• The drain duct is blocked.

 

• The filter is clogged up with food residues.

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

covered in a white film or

hardness of the water (see Rinse aid and salt).

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

• The rinse aid has been used up or the dosage is too low.

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

streaked or have a bluish tinge.

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

salt).

 

• The rinse aid dispenser setting is not suitable.

 

• The crockery is made from non-stick material or plastic.

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

• The crockery has not been arranged well.

 

• The sprayer arms cannot move freely.

 

• The wash cycle is too gentle (see Wash cycles).

 

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

• The lid on the rinse aid compartment has not been shut correctly.

 

• The filter is dirty or blocked (see Care and maintenance).

 

• The refined salt level is low (see Rinse aid and salt).

 

 

The dishwasher does not take any

• There is no water in the mains supply.

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

(several short beeps are emitted)

• Turn on the tap and the appliance will start after a few minutes.

(the Drying and End indicator lights

• The appliance lock has been activated because no action was taken when the

flash).

beeps sounded.

 

Switch off the appliance using the ON/OFF button, turn on the tap and switch

 

the appliance back on after 20 seconds by pressing the same button. Re-

 

program the appliance and restart the wash cycle.

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

(the Washing, Drying and End

Make sure the water inlet filter has not become blocked by impurities (see “Care

indicator lights flashes).

and maintenance” chapter).

 

 

*Only available in selected models.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contents Operating instructionsInstallation Connecting the water and electricity suppliesConnecting the water inlet hose Connecting the water outlet hoseAdvice regarding the first wash cycle Anti-flooding protectionAnti-condensation strip Electrical Connection Description of the appliance Overall viewControl panel Loading the racks Lower rackCutlery basket Upper rackStart-up and use Starting the dishwasherMeasuring out the detergent Wash cycles Dishwasher, reduce the amount of detergent used accordinglyAdjusting the amount of rinse aid Setting the water hardnessRinse aid and refined salt Measuring out the rinse aidCare and maintenance Precautions and advice General safetySaving energy and respecting Environment DisposalTroubleshooting Guarantee Months Parts and Labour GuaranteeYear Parts Guarantee Extended GuaranteesIndesit Service Parts and AccessoriesAppliance Registration Page 195081500.01
Related manuals
Manual 16 pages 20.64 Kb

IDS 105 specifications

The Indesit IDS 105 is a versatile and efficient that stands out in the market for its practicality and user-friendly features. Designed to cater to the needs of modern households, this slimline dishwasher combines functionality with compact size, making it ideal for kitchens with limited space.

One of the main features of the Indesit IDS 105 is its 10 place setting capacity. This allows users to wash a significant amount of dishes in a single load, which is perfect for families or those who entertain frequently. The dishwasher is designed to accommodate various dish types, including plates, glasses, cutlery, and pans, ensuring that users can fit everything they need without hassle.

The IDS 105 comes with multiple wash programs, allowing users to select the most suitable cycle for their load. These programs include Eco, Intensive, and Quick wash options, catering to different degrees of soiling and time constraints. The Eco mode is particularly noteworthy, as it focuses on minimizing water and energy consumption without compromising cleaning effectiveness.

Another significant aspect of the Indesit IDS 105 is its Energy Efficiency Class A+, which speaks to its environmentally friendly design. It is built to save energy and water, thus reducing utility bills and environmental impact. The model also features a special rinse aid and salt indicator to help maintain optimal performance and ensure proper cleaning results.

In terms of ease of use, the Indesit IDS 105 is equipped with a user-friendly control panel that includes straightforward buttons for selecting programs and adjustments. Its compact design allows for installation in smaller kitchens, while the stainless steel finish adds a touch of modernity to the appliance.

Noise levels are another consideration, and the IDS 105 operates at a modest 49 decibels, ensuring a relatively quiet cleaning operation. This makes it suitable for open-plan living spaces or areas where noise could be a distraction.

In conclusion, the Indesit IDS 105 presents an excellent solution for those seeking a compact yet efficient dishwasher. With its solid range of features, multiple wash programs, and energy-efficient design, it is well-suited to meet the demands of contemporary living while providing reliable performance.
Top Page Image Contents