Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

This dishwasher model can be built-in under the one worktop, and it therefore comes provided with an assembly kit com- plete with an instructions sheet.

Levelling the Appliance

Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4 cm., or let it run into the sink, making sure to avoid bending or crimping it. Use the speical plastic support that comes with the appliance (see figure to the right). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas)

connector, inserting the small
filter supplied with the
dishwasher and making sure
that it is fastened tightly in place
(see figure 2).
If the water pipes are new or	A
have not been used for an
extended period of time, let the
water run to make sure that the
water is clear and free of	Fig.2
impurities. If this precaution is

not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

D 61 specifications

Indesit D 61 is a versatile and efficient solution for modern households seeking a reliable and stylish tumble dryer. This appliance seamlessly combines functionality with user-friendly technology, making it an essential addition to any laundry room.

One of the standout features of the Indesit D 61 is its ample capacity. With a generous drum size, this tumble dryer can accommodate large loads, making it ideal for families or anyone who regularly deals with bulky items such as bedding and towels. The spacious design ensures that your laundry dries evenly and efficiently, reducing the need for multiple drying cycles.

Energy efficiency is another hallmark of the Indesit D 61. It is designed to minimize energy consumption, which not only helps the environment but also saves you money on utility bills. The appliance is equipped with various drying programs to suit different fabric types, ensuring that each load is treated with care. From cottons to delicate fabrics, users can easily select the appropriate setting for optimal results.

The Indesit D 61 also incorporates advanced technology to enhance the drying process. One notable feature is the sensor drying system, which intelligently detects the moisture level in the drum. This means that the dryer will automatically stop when the desired dryness is reached, preventing over-drying and preserving the quality of your clothes. This technology not only improves drying efficiency but also extends the lifespan of your garments.

In terms of usability, the Indesit D 61 is equipped with an intuitive control panel that allows for straightforward operation. The clear display and easy-to-use knobs make it simple to select the right program, adjust drying times, and monitor the process. Additionally, the appliance features a delay start function, giving you the flexibility to run cycles at your convenience.

Beyond functionality, the Indesit D 61 boasts a sleek design that can easily fit into various home aesthetics. Its modern exterior ensures that it complements your laundry space while maintaining a compact footprint.

In summary, the Indesit D 61 is a reliable and efficient tumble dryer that prioritizes user convenience and fabric care. With its generous capacity, energy-saving features, and advanced drying technology, it stands out as an excellent choice for anyone looking to streamline their laundry routine and achieve excellent drying results.