Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

This dishwasher model can be built-in under the one worktop, and it therefore comes provided with an assembly kit com- plete with an instructions sheet.

Levelling the Appliance

Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4 cm., or let it run into the sink, making sure to avoid bending or crimping it. Use the speical plastic support that comes with the appliance (see figure to the right). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas)

connector, inserting the small
filter supplied with the
dishwasher and making sure
that it is fastened tightly in place
(see figure 2).
If the water pipes are new or	A
have not been used for an	A
extended period of time, let the
water run to make sure that the
water is clear and free of	Fig.2
impurities. If this precaution is	Fig.2
not taken, there is a risk that the

water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

D 66 specifications

The Indesit D 66 is a versatile and reliable dishwasher designed to meet the needs of modern households. Engineered with sophistication, the D 66 model stands out in terms of efficiency, performance, and user convenience, making it a popular choice amongst appliance enthusiasts.

One of the key features of the Indesit D 66 is its energy efficiency. The appliance is designed to minimize energy consumption without compromising on performance. With a high energy rating, it ensures that users can maintain an eco-friendly kitchen while also enjoying lower utility bills. The D 66 model operates quietly, allowing users to run their dishwasher at any time of the day or night without disrupting their household activities.

The Indesit D 66 incorporates several advanced technologies aimed at providing the best washing results. The unique Sensor Technology automatically determines the load and adjusts the water and energy usage accordingly, making it a smart choice for both small and large loads. This feature not only enhances performance but also contributes to water conservation.

In terms of washing performance, the D 66 is equipped with a variety of wash programs tailored to different needs. From intensive cycles for heavily soiled pots and pans to eco-friendly settings for lightly soiled dishes, this dishwasher adapts and provides flexibility for all washing requirements. The Quick Wash program is particularly noteworthy as it significantly reduces the time needed for washing lightly soiled crockery, making it perfect for busy households or impromptu gatherings.

The D 66 also boasts a spacious interior, accommodating up to 13 place settings. This generous capacity ensures that users can wash a significant number of dishes in one go, saving time and energy. Adjustable racks and foldable tines provide further flexibility, enabling users to efficiently load a variety of dishware sizes.

Safety features are integral to the Indesit D 66, with child lock functions that prevent unintentional operation. Additionally, the dishwasher utilizes a self-cleaning filter system, which simplifies maintenance and ensures that clean water circulates efficiently throughout the wash cycle.

Overall, the Indesit D 66 stands as a testament to quality engineering, delivering an optimal blend of technology and ease of use. Its combination of efficiency, versatility, and thoughtful design makes it an excellent addition to any kitchen, catering to the diverse needs of today’s families.