Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

Drain Hose Connection

Fit the drain pipe into a drain line with a minimum diameter of 4 cm or place it over the sink. Avoid restricting or bending it. Use the special plastic elbow provided (see fi- gure) to position it in the best possible way. The part of the pipe marked with the letter A should be between 40 and 100 cm above the ground.

The pipe should not be immersed in water.

This dishwasher model can be built under a single worktop (please read the relevant instruction sheet).

Anti-flooding protection

Your dishwasher is provided with a special system which blocks the water supply in the event of leaks inside the appliance.

Cold Water Connection

This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Do not use a different hose. In the event of replacements, use original spare parts only.

Connect the cold water supply hose to a threaded 3/4 (gas) connector, and making sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

Caution: the dishwasher plug must be accessible so that maintenance can be done safely.

IDE 44 specifications

The Indesit IDE 44 is a versatile and efficient refrigerator designed to meet the needs of modern households. It combines functionality with stylish design, making it an attractive addition to any kitchen. One of the key features of the Indesit IDE 44 is its spacious interior, which offers ample storage capacity. With a total net volume of around 210 liters, this refrigerator allows users to organize their food items effectively, accommodating various packages and containers.

The refrigerator is equipped with adjustable shelves, which enable users to customize the layout according to their needs. Whether storing tall bottles or bulky containers, the flexibility of the shelves ensures optimal space utilization. The IDE 44 also includes a dedicated fruit and vegetable drawer, designed to keep fresh produce crisp and well-organized.

In terms of cooling technology, the Indesit IDE 44 employs advanced cooling systems that ensure even temperature distribution throughout the refrigerator. This feature helps to prolong the freshness of food items and minimizes the risk of unpleasant odors, making it an ideal choice for storing perishable goods. Additionally, the appliance is equipped with a special anti-bacterial system that helps to eliminate harmful bacteria, providing a safer environment for food storage.

Energy efficiency is another standout aspect of the Indesit IDE 44. It boasts an impressive energy rating, allowing users to enjoy lower energy bills while reducing their environmental impact. The appliance operates quietly, making it suitable for open-plan living spaces where noise levels can be a concern.

The Indesit IDE 44 is designed with user convenience in mind. Its reversible door allows for flexible installation in various kitchen layouts, ensuring that it can seamlessly fit into any space. The easy-to-use controls make adjusting the temperature and settings straightforward, catering to all user preferences.

Overall, the Indesit IDE 44 is a well-rounded refrigerator that blends practicality with modern technology. It offers ample storage, energy efficiency, and advanced cooling solutions, making it a smart choice for those looking to enhance their kitchen experience. Its sleek design, paired with functional features, ensures that the IDE 44 stands out as a reliable appliance for any household.