Installation, Positioning and levelling | Indesit K6C32/G specification

Installation

Before operating your new appliance please read

GB	this instruction booklet carefully. It contains important
	this instruction booklet carefully. It contains important
	information concerning the safe installation and
	operation of the appliance.
	Please keep these operating instructions for future
	reference. Make sure that the instructions are kept with
	the appliance if it is sold, given away or moved.
	The appliance must be installed by a qualified
	professional according to the instructions provided.
	Any necessary adjustment or maintenance must be
	performed after the appliance has been disconnected
	from the electricity supply.
	Positioning and levelling
	It is possible to install the appliance alongside
	cupboards whose height does not exceed that of the
	hob surface.
	Make sure that the wall in contact with the back of
	the appliance is made from a non-flammable, heat-
	resistant material (T 90°C).

To install the appliance correctly:

•Place it in the kitchen, dining room or the bed-sit (not in the bathroom).

•If the top of the hob is higher than the cupboards, the appliance must be installed at least 200 mm away from them.

The legs* provided with the appliance fit into the slots on the underside of the base of the cooker.

Electrical connection

Electric cookers come without a power supply cable. The cooker is designed to operate on an electricity supply which conforms to the electrical data shown on the Rating Plate. The cooker can be connected to the mains only after removing the back panel of the cooker itself with a screwdriver.

the following installation procedure must be carried out by a qualified electrician. The electrical installation must comply with the IEE Regulations, Building & local By-Lays.

1. Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

2. Loosen the cable clamp screw and remove

Min. 420mm.

HOOD

Min. 600mm.

Min. 420mm.

min. 650 mm. with hood min. 700 mm. without hood

•If the cooker is installed underneath a wall cabinet, there must be a minimum distance of 420 mm between this cabinet and the top of the hob. This distance should be increased to 700 mm if the wall cabinets are flammable (see figure).

it, using a screwdriver as a lever (see figure).

3. Remove the wire contact screws L-N- , then fasten the wires under the screw heads, respecting the colour code: Black/Blue (N), Red/Brown (L) and Bare Wire/Yellow-Green ().

•Do not position blinds behind the cooker or less than 200 mm away from its sides.

•Any hoods must be installed according to the instructions listed in the relevant operating manual.

Levelling

If it is necessary to level the appliance, screw the adjustable feet* into the places provided on each corner of the base of the cooker (see figure).

•Once the connections have been made, tighten all the terminal screws fully.

•Fasten the supply cable in place with the clamp and close the cover of the terminal board.

*Only available in certain models.

K6C32/G specifications

The Indesit K6C32/G is a versatile and efficient freestanding cooker designed to meet the demands of modern kitchens. This model combines advanced technologies and user-friendly features to deliver reliable cooking performance. One of the standout characteristics of the K6C32/G is its dual-fuel capability, which pairs the precision of gas cooking with the consistent heat of an electric oven. This allows users to enjoy the best of both cooking worlds, ensuring perfect meals every time.

The cooker is equipped with a spacious 58-liter capacity oven, providing ample space for multiple dishes or large family meals. Its energy efficiency is highlighted by an A rating, making it an eco-conscious choice that helps reduce energy bills while minimizing environmental impact. The programmable timer function enhances convenience, allowing users to set cooking times and ensure optimal results without the need for constant monitoring.

In terms of cooking options, the Indesit K6C32/G offers four gas burners on the hob, providing various heat levels suitable for boiling, frying, or simmering. The cast-iron support grids offer stability and durability, ensuring pots and pans remain securely in place while cooking. Additionally, the automatic ignition feature simplifies the process of igniting the burners, making it safer and easier to use, especially in busy kitchens.

The oven includes a range of cooking functions, including conventional and grill settings, enabling users to experiment with different culinary techniques. The interior of the oven features an easy-to-clean enamel coating, allowing for hassle-free maintenance and longevity.

Safety is also a prime concern for the Indesit K6C32/G, as it incorporates several safety features, including an integrated flame failure device that automatically cuts off the gas supply if a flame is extinguished. This provides peace of mind for households with children or pets.

Overall, the Indesit K6C32/G is a practical and reliable cooking appliance that combines functionality, safety, and efficiency, making it an excellent addition to any kitchen. Whether you're a seasoned chef or a culinary novice, this cooker offers the features needed to craft delicious meals with ease.