Energy Saving Tips, Ice trays | Indesit BA 139 S specs

Ice trays

This new concept of ice trays is an exclusive Merloni patent. The fact that they are situated on the inner door of the freezer compartment ensures greater ergonomics and cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided).

Instructions for use (Fig. 2)

Fill up the tray with water via the special hole up to the level indicated (MAX WATER LEVEL), taking care not to exceed it: inserting more water than is necessary will lead to the formation of ice which could obstruct the exit of the ice cubes.

If you have used an excessive amount of water, you will have to wait until the ice has melted, empty out the tray and re-fill it with water.

Once you have filled the ice tray up with water through the hole indicated, turn it by 90 °. Thanks to the connected compartments, the water fills up the special shapes, after which you can cover the hole up with the special cap and place the ice tray in the inner door of the freezer compartment.

Once the ice has formed, all you need to do is to knock the tray against a hard surface so that the ice cubes come away from their housing and come out of the same hole used to fill the tray with water. To make it easier for the ice cubes to come out, wet the outside of the tray.

WARNING: every time you fill up the ice tray with water , make sure that the same is completely empty and that there are no traces of ice left inside it.

The minimum time required for ice to form well is approximately 8 hours.

Fig. 2

Energy Saving Tips

- Install the appliance correctly

This means that the appliance should be installed away from heat sources or direct sunlight in a well ventilated room.

- Correct temperature settings

Set the refrigerator or freezer temperature knob to one of the medium settings. Very low temperatures will not only consume a great deal of energy but will neither improve or lengthen the storage life of the food. Excessively low tem- perature may in fact spoil vegetables, cold meats and cheese.

- Do not overfill your appliance

Remember that proper storage of food requires good air circulation. Overfilling your appliance will prevent this circu- lation and overwork the compressor.

- Shut the doors

Open your appliance only when strictly necessary; remem- ber that every time you open the door most of the cold air will be lost. The motor will have to run, and consume en- ergy, to restore the correct temperature.

- Check the door seals

keep the gaskets clean and soft so that they fit closely against the door to ensure that no cold air is lost.

- Never store hot foods

A container of hot food in the refrigerator will increase the temperature significantly; allow food to cool to room tem- perature before storing.

- Check your appliance for build up of ice

Remember to check the walls of the freezer for frost; when the frost becomes too thick, defrost the freezer immediately (See “Maintenance Instructions”).

GB6

BA 139 S specifications

The Indesit BA 139 S is a modern refrigerator that combines functionality, efficiency, and a sleek design to enhance any kitchen space. As a popular choice among consumers, this appliance is engineered to meet everyday food preservation needs while offering various features that simplify users' lives.

One of the standout characteristics of the Indesit BA 139 S is its spacious interior, which provides ample room for groceries, drinks, and leftovers. The refrigerator is designed with adjustable shelves, allowing users to customize storage according to their requirements. This versatility makes it easy to store everything from large pots to tall bottles, ensuring effective organization.

The cooling technology employed in the Indesit BA 139 S focuses on maintaining an optimal environment for food preservation. It utilizes a No Frost system, which prevents ice build-up and ensures consistent temperatures throughout the fridge. This not only helps food stay fresher for longer but also eliminates the hassle of manual defrosting, saving users time and effort.

Energy efficiency is another critical aspect of this refrigerator. The Indesit BA 139 S boasts an impressive energy rating, making it an eco-friendly option that can lead to savings on electricity bills. The energy-efficient compressor helps maintain the internal temperature without excessive energy consumption, thereby reducing the appliance's carbon footprint.

Additional features include a reversible door, allowing for customizable installation based on kitchen layout. This flexibility is particularly useful for those with limited space. The interior lighting is also designed with convenience in mind, offering bright illumination to easily locate items, even in dimly lit environments.

Furthermore, the refrigerator is equipped with a temperature control system that enables users to adjust the settings according to their needs. This ensures optimal storage conditions for various types of food, from dairy to fresh produce.

Overall, the Indesit BA 139 S stands out as a reliable and efficient refrigerator option for families and individuals alike. Its combination of spaciousness, advanced cooling technology, energy efficiency, and user-friendly features make it an ideal choice for anyone looking to enhance their kitchen experience with a dependable appliance.