Indesit UFAN 400 NF Maintenance and care, Switching the appliance off, Cleaning the appliance

Page 6

GB

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact.

Cleaning the appliance

The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.

The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.

The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.

If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

6

Image 6
Contents Operating Instructions FreezerInstallation Positioning and connectionReversible doors Description of the appliance Overall viewUsing the freezer to its full potential Start-up and useStarting the appliance Cleaning the appliance Maintenance and careSwitching the appliance off Avoiding mould and unpleasant odoursDisposal Precautions and tipsGeneral safety Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsMonths Parts and Labour Guarantee AssistanceAfter Sales Service Page 195084149.00