Space for Fixing, Cooker Hoods, Levelling

Installation

SPACE FOR FIXING

The cooker can be close fitted below hotplate level. This requires a minimum distance of 600mm between cupboard units of hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.

The diagram below illustrates the minimum clearance between the cooker and adjacent walls, cupboards etc.

The wall behind the cooker, 50mm below and 450mm above, and the width of the cooker, must be

anon-combustible material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a clearance of at least 50mm to allow the main oven door to open fully for when removing oven shelves.

mmMin	Min
mmMin	750mm	65 mm Min
		65 mm Min
400
	600 mm Min

COOKER HOODS

If a cooker hood is to be installed, refer to the cooker hood manufacturers' instructions regarding fixing height.

UNPACKING THE COOKER

Unpack the components from inside the grill and		GB
oven.
Check that the following parts are present:
Grill pan and grid	Top oven/grill shelf heat shield
Pan supports	Main oven shelves (2)
Enamelled
burner caps (4)	Top oven/grill shelf (1)
Aluminium
burner bodies(4)	Literature

LEVELLING

Four skid feet are fitted which can be adjusted up or down to level the cooker.

CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)

Each burner requires the injector to be replaced and bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Remove the enamelled baffle at the front of the grill (2 screws).

5.Remove the screw on the right hand side of the burner and gently slide the burner off the injector.

6.Using a 7mm socket, replace the grill injector as appropriate (see table on previous page).

7.Re-assemble the burner and baffle.

8.Inside the top oven, remove the central screw securing the burner retainer. Slide the retainer to the right slightly and lift away.

9.Lift the burner assembly and place on the floor of the oven to the right of the burner opening.

10.Using a 7mm socket, replace the oven injector as appropriate (see table on previous page).

11.Re-assemble the oven burner and retainer. 12.Replace the main oven injector following the same

procedure as for the top oven. 13.Carefully pull off the control knobs.

14.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The main oven thermostat bypass screw is located on the body of the thermostat below the spindle, the top oven thermostat bypass screw is located on the body of the thermostat to the right of the spindle and the hotplate tap bypass screws are located down the centre of the spindle.

15.Re-assemble the control panel parts.

16.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

ID60G2 specifications

The Indesit ID60G2 is a versatile and reliable freestanding cooker that combines modern technology with practical functionality. Designed to meet the everyday cooking needs of families, this appliance is a perfect addition to any kitchen.

One of the standout features of the Indesit ID60G2 is its generous cooking capacity. The cooker comes equipped with a spacious oven, offering ample space for multiple dishes to be cooked simultaneously. This is especially beneficial for busy households or those who love to entertain. The oven includes two different shelves, allowing for versatile cooking options, and a large viewing window that enables users to monitor their food without opening the door.

The ID60G2 features a conventional gas cooking system, ensuring even heat distribution for perfectly cooked meals. The oven is supported by a gas hob with four burners, providing flexibility for various cooking styles. Each burner delivers precise heat control, accommodating everything from simmering sauces to boiling pasta. The stainless steel finish not only adds a modern touch to the design but also ensures easy cleaning and maintenance.

Safety is paramount, and the Indesit ID60G2 comes with a flame failure device. This important feature automatically cuts off the gas supply if a flame is extinguished unexpectedly, offering peace of mind during cooking. Additionally, the removable glass oven door makes it easy to clean, ensuring that your cooker remains in pristine condition.

Another significant characteristic of this model is its energy efficiency. With a good energy rating, it helps to keep running costs down while still delivering excellent cooking performance. This makes the Indesit ID60G2 not only a practical choice but also an eco-friendly one.

The cooker is also designed for user-friendliness with simple controls that allow for easy adjustment of temperature and cooking settings. The sleek design, combined with its functional features, makes the Indesit ID60G2 an ideal option for anyone looking to enhance their culinary experience without sacrificing style or efficiency.

In summary, the Indesit ID60G2 combines ample cooking space, advanced safety features, and energy efficiency in a user-friendly package, making it a valuable asset for any kitchen. Whether you're preparing everyday meals or hosting special occasions, this cooker is equipped to handle it all with ease.