Indesit KP9 F11 S/G S manual Gas connection

Page 5

The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

Before connecting the appliance to the power supply, make sure that:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated by the data plate.

•The voltage is in the range between the values indicated on the data plate.

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only.

!The manufacturer declines any liability should these safety measures not be observed.

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

- Earth

Blue

- Neutral

Brown

- Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked “E”

or or coloured Green or Green & Yellow.

Connect the Brown wire to the terminal marked “L” or coloured Red.

Connect the Blue wire to the terminal marked “N” or coloured Black.

FAILURE TO OBSERVE THE ACCIDENT-PREVENTION REGULATIONS RELIEVES THE MANUFACTURER OF ALL LIABILITY.

Replacing the cable

Use a rubber cable of the type H05VV-F with a cross section of 3 x 1.5 mm². The yellow-green earth wire must be 2 ÷ 3 cm longer than the other wires.

Gas connection

 

GB

Connection to the gas network or to the gas cylinder

may be carried out using a flexible rubber or steel hose,

 

 

in accordance with current national legislation and after

 

making sure that the appliance is suited to the type of gas

 

with which it will be supplied (see the rating sticker on the

 

cover: if this is not the case see below). When using liquid

 

gas from a cylinder, install a pressure regulator which

 

complies with current national regulations.

 

!Make sure that the gas supply pressure is consistent with the values indicated in the Table of burner and nozzle specifications (see below). This will ensure the safe operation and durability of your appliance while maintaining efficient energy consumption.

Gas connection using a flexible rubber hose

Make sure that the hose complies with current national legislation. The internal diameter of the hose must measure: 8 mm for a liquid gas supply;13 mm for a methane gas supply.

Once the connection has been performed, make sure that the hose:

•Does not come into contact with any parts which reach temperatures of over 50°C.

•Is not subject to any pulling or twisting forces and that it is not kinked or bent.

•Does not come into contact with blades, sharp corners or moving parts and that it is not compressed.

•Is easy to inspect along its whole length so that its condition may be checked.

•Is shorter than 1500 mm.

•Fits firmly into place at both ends, where it will be fixed using clamps which comply with current regulations.

!If one or more of these conditions is not fulfilled or if the cooker must be installed according to the conditions listed for class 2 - subclass 1 appliances (installed between two cupboards), the flexible steel hose must be used instead

(see below).

Connecting a flexible jointless stainless steel pipe to a threaded attachment

Make sure that the hose and gaskets comply with current national legislation. To begin using the hose, remove the hose holder on the appliance (the gas supply inlet on the appliance is a cylindrical threaded 1/2 gas male attachment).

!Perform the connection in such a way that the hose length does not exceed a maximum of 2 metres, making sure that the hose is not compressed and does not come into contact with moving parts.

Checking the connection for leaks

When the installation process is complete, check the hose fittings for leaks using a soapy solution. Never use a flame.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents KP9 F11 S/G S Operating InstructionsAssistance Overall view Description of the applianceAuxliary gas burner 14IGNITOR * for Gas BurnersPositioning and levelling GB InstallationElectrical connection Appliance Must be EarthedGas connection Adapting the hob Safety ChainAdapting to different types of gas Using the hob Table of burner and nozzle specificationsUsing the oven Start-up and useGrilling Indicator lightConventional oven cooking Maintenance and care Precautions and tipsGeneral safety DisposalReplacing the oven light bulb Indesit Service Afetr Sales ServiceParts and Accessories Essential Contact InformationGB Guarantee

KP9 F11 S/G S specifications

The Indesit KP9 F11 S/G S is a versatile and efficient kitchen appliance designed to make cooking a seamless and enjoyable experience. This model embodies Indesit's commitment to innovation, ease of use, and functional design.

At the heart of the KP9 F11 S/G S is its spacious oven with a capacity that accommodates large meals and facilitates multi-tier cooking. This feature is particularly useful for family gatherings or special occasions where multiple dishes need to be prepared simultaneously. The appliance is equipped with a fan-assisted convection system, ensuring even heat distribution throughout the oven. This technology allows for consistent baking and roasting results, reducing the need for rotating dishes during cooking.

One of the standout features of the Indesit KP9 F11 S/G S is its integrated grill function. This allows users to achieve that desirable crispy finish on dishes such as meats, vegetables, and casseroles. The grill operates independently or can be used in conjunction with the oven, offering versatile cooking options. Additionally, the appliance boasts a range of pre-set cooking programs, providing guidance for a variety of dishes, which takes the guesswork out of meal preparation.

The controls of the Indesit KP9 F11 S/G S are intuitively designed, with a clear display for easy navigation. The appliance features easy-to-use knobs and push-button controls that enable users to quickly adjust temperature settings and cooking modes. This user-friendly interface makes it accessible for cooks of all skill levels, from beginners to seasoned chefs.

Energy efficiency is another highlight of this model. The Indesit KP9 F11 S/G S boasts impressive energy ratings, reducing electricity consumption without compromising performance. This eco-friendly approach helps users save on energy bills while minimizing their environmental impact.

Cleaning and maintenance are simplified with the oven's easy-to-clean enamel interior. This feature prevents food residues from sticking, making it easier to wipe down after use. Additionally, the removable glass door ensures that users can maintain a clear view of their culinary creations while also making cleaning more manageable.

Overall, the Indesit KP9 F11 S/G S combines functionality, efficiency, and style. Its advanced features and thoughtful design make it a valuable addition to any modern kitchen, catering to a wide range of cooking needs and preferences. Whether you're an adventurous cook or a busy parent, this appliance is designed to meet your culinary demands while delivering delicious results.
Top Page Image Contents