IKEA OV9 manual Play, 70 C

ENGLISH 9

1	2
		1	Time and meatprobe temperature dis-
			play

2 Function indicators

3 Button " + "

4 Selector button

5 Button " - "

5 4 3

Setting the clock functions

• Push selector button again and again until the desired function indicator flashes.

•To set or modify the time use" + " / " - " in the next 5 seconds. After that the set time begins to run.

Cancelling the clock function

Push selector button again and again until the function indicator shows the right function and push " - " button. After few seconds the clock function goes out.

Meat probe

Meat probe measures the core temperature of the meat. When the meat reaches set tem- perature the oven switches off automatically.

It is kindly suggested to use only the rec- ommended meat probe for this appli-

ance.

Warning! The meat probe is hot! Risk of burns! Be careful when you remove the

tip and plug of the meat probe.

1.Insert the meat probe plug into the socket in the side wall of the oven.

2.Insert the meat probe point in the middle of the meat, as far as it goes.

3.Push selector button again and again until Meat probe indicator flashes.

4.Use " + " / " - " buttons to set the desired core temperature. You can set the tem- perature from 30 °C to 99 °C.

Refer to suggested values in the table.

5.Use control knobs to set the desired oven cooking function and temperature.

6.When the meat reaches set core temper- ature, the oven switches off automatically.

7.Remove the meat probe.

Suggested core temperatures

50 °C	Rare
60 °C	Medium
70 °C	Well done

In case the level of cooking is not satisfactory do above steps once again and set higher core temperature.

Switching off the display

You can save energy by switching off the clock display.

1.Push " + " and " - " buttons at the same time and hold for 5 seconds.

The display switches off.

2.To switch on the display push any button.