Preliminary Assembly Instructions, Installation

PRELIMINARY ASSEMBLY INSTRUCTIONS

The hood has been designed to be installed and used either as a "Suction Model", or as a "Filter Model".

Suction model (see symbol in the installation booklet)

Cooking steam is sucked and channelled outside the house through a discharge duct (not supplied), fitted to the hood steam outlet. Ensure that the discharge duct is correctly fitted to the air outlet, unit using an appropriate connection system.

Important: If already installed, remove the carbon filter/s.

Filter model (see symbol in the installation booklet)

The air is filtered through one or more the carbon filters, and then resent into the room.

Important: Ensure appropriate air circulation around the hood.

Important: If the hood is supplied without carbon filters, these must be ordered and fitted before the hood can be used.

The hood should be installed away from particularly dirty areas, windows, doors and heat sources.

The hood is sold with all necessary components for installation on most types of walls or ceilings. However, ask a qualified technician to check that the items supplied are suitable for the type of wall/ceiling.

INSTALLATION

After unpacking the appliance, check for any transport damage. In the event of problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only remove the appliance from its polystyrene foam packaging at the time of installation.

PREPARING FOR INSTALLATION

WARNING: this is a heavy product; the hood should only be lifted and installed by two or more people.

The minimum distance between the cooking pans on top of the cooker and the bottom of the hood must not be less than 60 cm for electric cookers and 65 cm for gas or mixed cookers.

Before installation also check the minimum distances stated in the manual of the cooker.

ELECTRICAL CONNECTION

Make sure the power voltage specified on the appliance rating plate is the same as the mains voltage. This information may be found on the inside of the hood, under the grease filter.

Power cable replacement (type H05 RR-F 3 x 1.5 mm) must be carried out by a qualified electrician. Contact an authorized service centre.

If the hood is fitted with an electric plug, connect the plug to a socket complying with current regulations, located in an accessible place. If no plug is fitted (direct wiring to the mains), or if the socket is not located in an accessible place, install a standardised double pole power switch that will enable complete isolation from the mains in case of category III overvoltage conditions, in accordance with installation rules.

GENERAL RECOMMENDATIONS

Before use

Remove cardboard protection pieces, protective film and adhesive labels from accessories.

Check the appliance for any transport damage.

During use

To avoid any damage do not place any weights on the appliance.

Do not expose the appliance to atmospheric agents.

GB4

HW320 specifications

The IKEA HW320 is an innovative addition to the company's renowned line of home furnishings, blending style, functionality, and modern technology. Designed with the contemporary consumer in mind, the HW320 stands out with its efficient use of space and thoughtful design.

One of the key features of the HW320 is its modularity. This allows users to customize the layout according to their specific needs and preferences. The components can be arranged in various configurations, enabling the creation of a personalized living space that adapts to different activities, whether it be lounging, working, or entertaining. This versatility is complemented by a range of fabric options and color palettes, making it easy to fit the HW320 into any interior décor.

In terms of technology, the HW320 does not compromise. It incorporates smart home integrations that enhance user experience and convenience. With Bluetooth connectivity, users can control built-in lighting and ambient sound systems directly from their smartphone or tablet. This smart technology ensures that homeowners can easily create the perfect atmosphere for any occasion, from a cozy movie night to a lively gathering with friends.

The HW320 is also designed with sustainability in mind. IKEA has committed to using eco-friendly materials and manufacturing processes, and the HW320 reflects this philosophy. The product is made from responsibly sourced wood and textiles, minimizing its environmental impact. Additionally, the furniture is constructed for durability, ensuring longevity and reducing waste.

Additionally, the HW320 features contemporary ergonomic design elements. The seats and cushions are designed not just for aesthetic appeal but also for user comfort, promoting healthy posture and relaxation. The softness of the materials combined with sturdy support provides an ideal seating experience for hours of enjoyment.

Overall, the IKEA HW320 encapsulates the brand's dedication to innovative design, functionality, and sustainability. With its modularity, smart technology, and eco-friendly construction, it meets the demands of modern living while maintaining a stylish appearance. The HW320 is an appealing option for anyone looking to furnish their home with conscientious, versatile, and aesthetically pleasing pieces that enhance their lifestyle.