They are well seated, Supplied, Canopy

•Expand the sides of the upper chimney stack item 2.1 and

	place the chimney over the two brackets 7.2.1 ensuring
	they are well seated.
•	Secure the chimney stack to the brackets 7.2.1 using
	the four self tapping screws item 12c (2.9 x 9.5mm)
	supplied.	2.1
		2.1
	Fitting the Lower Chimney	2
	Fitting the Lower Chimney	8b
• Expand the of the lower chimney stack item 2.2 and place		8b
• Expand the of the lower chimney stack item 2.2 and place		2.2
	the chimney over the upper chimney stack item 2.1 and	2.2
	the canopy.
•	Secure the chimney stack to the canopy using the two
	screws item 12c (2.9 x 9.5mm) supplied..
• After the chimney has been secured into position, insert
	the two plastic recirculation grilles item 8a (right-hand)
	and 8b (left-hand) in the apertures on each side of the

chimney. The grilles are marked with two arrows and should be fitted with one arrow pointing upwards and the other toward the front.

•When the hood is used in the recirculation mode ensure that the grilles are properly secured to the recirculation extension spigot item 14.1.

7.2.1