John Lewis JLDWW 1206 Water inlet hose with safety valve, Water outlet hose connection

Page 29

spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical data". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with a locknut.)

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

DO NOT use connection hoses which have previously been used on an old appliance.

This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations.

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

•The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

•If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

•A water inlet hose with safety valve must only be replaced by a local repair agent.

Warning! Dangerous voltage

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.To a stand pipe provided with venthole,

minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Jldww 1206 Dishwasher Child safety Important safety informationInstallation Maintenance and cleaning Service General safetyCorrect use Ecological hintsEnvironmental information Contents Description of the appliance Half load button Control panelTo enter the menu options Menu optionsProgramme Degree of soil Type of load Programme description Washing programmesWater softener When the dishwasher is first installedSetting electronically Setting the water softenerSetting manually To fill Filling with dishwasher saltFilling with rinse aid Ensure that the lid is closed after every refill Adjusting the rinse aid dosageLoading cutlery and dishes Daily useCutlery basket Lower basketUpper basket Use of detergent Adjusting the height of the upper basketFill with detergent To move to the higher position proceed as followsMulti tab function Activation/deactivation of the Multi tab function Select and start a washing programmeCancelling a delay start or a washing programme in progress Message Programme END appears on the display Interrupt a washing programme in progressUnloading the dishwasher Maintenance and cleaningCleaning the filters Internal cleaning External cleaningProlonged periods of non- operation Never use the dishwasher without filtersMoving the machine Frost precautionsSomething not working Anti-flood device is activated Possible cause and solution Wash results are not satisfactory Dishes are wet and dull Installation Technical dataUnpacking Fitting under a counterLevelling Water connectionsWater supply connections Proceed as followsWater outlet hose connection Water inlet hose with safety valvePage 0870 010 Repairs After sales serviceElectrical connection Spare parts Page Page Page 117986660 01 062007 Subject to change without notice

JLDWW 1206 specifications

The John Lewis JLDWW 1206 is a stylish and functional dishwasher designed to cater to the needs of modern households. This appliance features an array of technologies and specifications that enhance its usability and efficiency, making it an excellent choice for anyone looking to streamline their kitchen cleanup.

One of the most notable aspects of the JLDWW 1206 is its energy efficiency, boasting an A++ energy rating. This not only helps in reducing energy consumption but also assists in lowering electricity bills, which is an important consideration for eco-conscious consumers. The dishwasher utilizes advanced technologies to optimize water usage, ensuring that each cycle uses just the right amount of water needed for thorough cleaning.

The JLDWW 1206 is equipped with multiple wash programs, allowing users to select the right setting for their specific needs. With options such as intensive wash for heavily soiled pots and pans, eco wash for energy-saving cleaning, and a quick wash for when time is of the essence, this dishwasher offers versatility to handle a variety of dishes effectively.

Furthermore, this model includes a delay timer feature, enabling users to program the dishwasher to start at a time that suits their schedule. This is particularly useful for those who want to take advantage of off-peak electricity rates or ensure that dishes are washed overnight.

In terms of capacity, the JLDWW 1206 can accommodate up to 12 place settings, making it ideal for small to medium-sized families. The adjustable top basket allows for flexibility when loading larger items, ensuring that no dish is left unwashed.

Noise levels are another important consideration for many consumers, and this model operates at a quiet 49 dB, which is comparable to the sound of a normal conversation. This makes it a suitable option for open-plan living spaces where noise can be a concern.

The John Lewis JLDWW 1206 also features a sleek design, with a modern front panel that integrates seamlessly into any kitchen decor. It comes with a stainless-steel finish that not only looks great but is also easy to maintain, resisting fingerprints and smudges.

Overall, the John Lewis JLDWW 1206 is a reliable and efficient dishwasher that combines advanced technology, user-friendly features, and an attractive design to enhance the overall kitchen experience. Its capacity, noise levels, and energy efficiency make it a practical addition to any home.
Top Page Image Contents