Installation, Positioning and connection

Installation

!Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.

!Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct GB colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

-The plug is replaced by a fused 13amp re-wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE

WITH THE FOLLOWING CODE...

Green and Yellow - Earth
Blue	- Neutral
Brown	- Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked ‘E’ or or coloured Green and Yellow.

-Connect Brown wire to terminal marked ‘L’ or coloured red or brown.

-Connect Blue wire to terminal marked ‘N’ or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives:

Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

IBXXAAAXX, BIAXXXX, BIAAXXXX, BIAAAXXXX, IBXXAAXX specifications

The Indesit IBXXAXX, IBXXAAXX, BIAAAXXXX, BIAAXXXX, and BIAXXXX are part of a comprehensive line of refrigeration appliances aimed at providing superior cooling solutions for modern kitchens. These models stand out for their ability to combine efficiency, functionality, and user-friendly features in one sleek package.

One of the central features across these models is their Energy Efficiency Class, which ensures that users are not only saving on their energy bills but also minimizing their environmental impact. The appliances are designed to operate efficiently, providing effective cooling while consuming less power than older models. This is particularly appealing in today’s market, where energy-saving technologies are increasingly prioritized.

In terms of storage capability, these Indesit models come equipped with several adjustable shelves, allowing users to customize the interior layout based on their needs. This flexibility is complemented by spacious compartments for fruits, vegetables, and dairy products, ensuring that food is stored at the optimal conditions for freshness. Additionally, some models feature dedicated wine racks, making them a great choice for enthusiasts looking to store their favorite bottles.

Incorporating modern cooling technologies, the Indesit IBXXAXX and similar models utilize No Frost technology, which prevents the build-up of ice inside the fridge and freezer compartments. This innovation not only saves the user from the tedious task of defrosting but also helps in maintaining consistent temperatures across all shelves. As a bonus, it helps in preserving the quality of food more effectively.

For added convenience, features such as reversible doors, which allow users to adjust the door swing direction to fit their kitchen layout, are standard in these models. The LED lighting not only illuminates the interiors brightly but is also energy-efficient, ensuring that users can easily find what they need without wasting energy.

Moreover, these Indesit models prioritize user comfort with their low noise operation. This is especially vital for open-plan living spaces where a quieter appliance contributes to a more peaceful environment.

In summary, the Indesit IBXXAXX, IBXXAAXX, BIAAAXXXX, BIAAXXXX, and BIAXXXX embody a commitment to modern convenience and energy efficiency. With their robust features, innovative cooling technologies, and thoughtful design elements, these refrigerators are ideal choices for those looking to embrace both sustainability and practicality in their kitchen experience.