John Lewis JLDWW 1205 instruction manual Activation/deactivation of the Multi tab function

Page 20

Multi tab function

This appliance is equipped with the Multi tab function, that allows the use of combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...). Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.

Once this function is selected it will remain active for all following wash programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

When using the Multi tab function, the cycle durations may change. If this is the case, the running time for the programme is automatically updated on the digital display.

Activate/deactivate the Multi tab function before the start of a washing programme.

Once the programme is running, the Multi tab function can NO longer be changed. If you want to cancel the Multi tab function you have to cancel the programme setting and then deactivate the Multi tab function.

In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the Multi tab function

Press the Multi tab button, the Multi tab indicator light illuminates. This means that the function is active.

To deactivate the function press the Multi tab button, the Multi tab indicator light turns off.

If the drying results are not satisfactory we suggest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

•The activation/deactivation of the rinse aid dispenser is only possible with the Multi tab function active.

Activation/deactivation of the rinse aid dispenser

1.Press the On/Off button. The dishwasher must be in setting mode.

2.Simultaneously press and hold function buttons B and C, until the lights Glass, Rinse hold and Multi tab start flashing.

3.Press function button B, the lights Glass and Multi tab turn off while the light Rinse hold continues to flash. The digital display indicates the current setting.

rinse aid dispenser deactivated

rinse aid dispenser activated

4.To change the setting, press function button B again, the digital display indicates the new setting

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Jldww 1205 Dishwasher Child safety Important safety informationInstallation General safety Maintenance and cleaning ServiceCorrect use Ecological hintsEnvironmental information Contents Description of the appliance Control panel Indicator lights Multi tab buttonHalf load button Function buttonsType of load Programme description Setting modeWashing programmes Programme Rinse hold Degree of soil Type of loadHalf load option available with programme Energy Consumption KWhUse of salt When the dishwasher is first installedWater softener Setting the water softener Setting manuallySetting electronically ExamplesTo fill Filling with dishwasher saltFilling with rinse aid Adjusting the rinse aid dosage Ensure that the lid is closed after every refillAre of limited suitability Daily useLoading cutlery and dishes Lower basket Cutlery basket Adjusting the height of the upper basket Upper basketUse of detergent Fill with detergentTo move to the higher position proceed as follows Maximum height of the dishes Lower basketWhen using detergent tablets place the tablet in compartment Multi tab function Activation/deactivation of the Multi tab functionSelect and start a washing programme Interrupt a washing programme in progress Setting and starting the programme with delay startCancelling a delay start or a washing programme in progress Unloading the dishwasher Maintenance and cleaningCleaning the filters External cleaning Internal cleaningFrost precautions Prolonged periods of non- operationFault code and malfunction Anti-flood device is activated Possible cause and solutionSomething not working Dishwasher does not fill with waterDishwasher door has not been properly closed. Close the door Technical data Water drops have dried onto glasses and dishesInstallation UnpackingFitting under a counter Proceed as followsWater supply connections Water connectionsLevelling Water inlet hose with safety valve Water outlet hose connectionPage 0870 010 Repairs After sales serviceElectrical connection Spare parts Page Page 117986670 01 062007 Subject to change without notice
Top Page Image Contents