Indesit BAA 35P manual Installation, Positioning and connection, Levelling, Electrical connections

Page 2

Installation

GB

! Before operating your new appliance, please read

these operating instructions carefully. They contain

 

 

important information for safe use, installation and care

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity- free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily

accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Connection of the water supply

To carry this out, use the kit provided which contains all the necessary elements for connection to the water supply.

To improve the performance of the Aqua Care, we recommend that you fit a tap with a filter on the pipe for the connection to the water system: in this way it will be possible to manually interrupt the water supply during long periods in which Aqua Care is not used.

!The water pressure inside the water system must be between 0.8 bar and 8 bar.

!The appliance must only be connected to a water supply suitable for drinking.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operating Instructions REFRIGERATOR/FREEZER CombinationPositioning InstallationPositioning and connection LevellingReversible doors Disposing of the plugRefrigerator Operation Knob Description of the applianceControl panel Freezer Operation KnobFlex Cool BOX for Meat Overall viewMULTI-USE bin Can Rack shelvesAccessories Flex Cool BOXStarting the appliance Using the refrigerator to its full potentialStart-up and use Chiller systemUsing the freezer to its full potential Temperature see DescriptionCleaning the appliance Maintenance and careSwitching the appliance off Avoiding mould and unpleasant odoursDefrosting the freezer compartment Defrosting the applianceDefrosting the refrigerator compartment Replacing the light bulbDisposal Precautions and tipsGeneral safety Respecting and conserving the environmentGB Malfunctions TroubleshootingPossible causes / Solutions Model AssistanceCommunicating Page Page 195052263.00

BAA 35P specifications

The Indesit BAA 35P is an exceptional refrigerator designed to combine efficiency, practicality, and modern aesthetics for everyday use in the kitchen. This appliance stands out for its performance and user-friendly features, making it a popular choice for families and individuals alike.

One of the primary features of the Indesit BAA 35P is its ample storage capacity. With a total net capacity of 247 liters, this refrigerator provides ample space for all your groceries and perishables. It includes adjustable shelves made of durable glass, allowing users to customize the interior layout according to their needs. The bottle rack and door baskets are additional thoughtful touches that help maximize storage solutions.

In terms of energy efficiency, the Indesit BAA 35P boasts an A+ energy rating. This ensures that the refrigerator not only reduces energy consumption but also saves on electricity bills, making it an environmentally friendly choice without compromising on performance. The appliance operates quietly, ensuring that it does not disrupt the peace of home life.

The Indesit BAA 35P incorporates advanced cooling technologies, including a fast-freezing function that quickly brings temperatures down to preserve food freshness. This feature is particularly useful when storing large quantities of groceries at once or when stocking up on frozen items. The No Frost technology also means that users no longer need to deal with the hassle of defrosting, as this system prevents frost build-up, ensuring efficient operation and easy maintenance.

The refrigerator comes equipped with a reversible door feature, allowing it to be installed in various kitchen layouts, providing flexibility for those working with limited space. Additionally, its sleek design integrates seamlessly into any modern kitchen aesthetic, featuring a classic white finish that appeals to a broad audience.

Moreover, the Indesit BAA 35P is designed for practicality with features such as an adjustable thermostat, ensuring that your food is kept at the ideal temperature for optimal freshness. It also offers a clear interior light that illuminates the contents, making it easy to find what you need—even in the darkest corners.

Overall, the Indesit BAA 35P combines functionality with aesthetic appeal, making it an excellent addition to any kitchen setup. With its efficient energy use, smart storage solutions, and user-friendly technologies, this refrigerator is engineered to meet the demands of the modern household while ensuring convenience and ease of use.
Top Page Image Contents