Heatcraft Refrigeration Products PRO3 manual Warranty Statement

Page 23

PRO3 Side Mount Packaged Refrigeration System

Warranty Statement

Heatcraft Refrigeration Products LLC warrants to its direct purchasers thatthePRO3 product,exceptServiceParts,manufacturedbyHeatcraft Refrigeration Products LLC shall be of a merchantable quality, free of defects in material or workmanship, under normal use and service for a period of two (2) years from date of original installation, or thirty (30) months from date of shipment by Heatcraft Refrigeration Products LLC, whichever first occurs. Service Parts, for product out of original warranty, should be so warranted for a period of twelve (12) months from date of shipment. Any product covered by this order found to Heatcraft Refrigeration Products LLC’s satisfaction to be defective upon examination at Heatcraft Refrigeration Products LLC’s factory will, at Heatcraft Refrigeration Products LLC’s option, be repaired or replaced and returned to Buyer via lowest common carrier, or Heatcraft Refrigeration Products LLC may at its option grant Buyer a credit for the purchase price of the defective article. Upon return of a defective product to Heatcraft Refrigeration Products LLC’s plant, freight prepaid, by Buyer, correction of such defect by repair or replacement, and return freight via lowest common carrier, shall constitute full performance by Heatcraft Refrigeration Products LLC of its obligations hereunder.

Hermetic compressors furnished by Heatcraft Refrigeration Products LLC are subject to the standard warranty terms set forth above, except that motor compressor replacements or exchanges shall be made through the nearest authorized wholesaler of the motor compressor manufacturer (not at Heatcraft Refrigeration Products LLC’s factory) and no freight shall be allowed for transportation of the motor compressor to and from the wholesaler. The replacement motor compressor shall be identical to the model of the motor compressor beingreplaced.Additionalchargeswhichmaybeincurredthroughout the substitution of other than identical replacements are not covered by this warranty.

This equipment is designed to operate properly and produce the rated capacity when installed in accordance with good refrigeration industry practices.

The following conditions should be adhered to when installing this unit to maintain the manufacturers warranty:

(a)The power supply to the unit must meet the following conditions:

A.Threephasevoltagesmustbe+/-10% ofnameplate ratings. Single phase must be within +10% or -5% of nameplate ratings.

B.Phase imbalance cannot exceed 2%.

(b)All control and safety switch circuits must be properly connected according to the wiring diagram.

(c)The factory installed wiring must not be changed without written factory approval.

Optional Three-Year Extended Compressor Warranty

The foregoing is in lieu of all other warranties, express or implied, notwithstanding the provisions of the uniform commercial code, the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, or any other statutory or common law, federal or state.

Heatcraft Refrigeration Products LLC makes no warranty expressed or implied, of fitness for any particular purpose, or of any other nature whatsoever, with respect to products manufactured or sold by Heatcraft Refrigeration Products LLC hereunder, except as specifically set forth above and on the face hereof. It is expressly understood and agreed that Heatcraft Refrigeration Products LLC shall not be liable to buyer,oranycustomerofBuyer,fordirectorindirect,special,incidental, consequential or penal damages, or for any expenses incurred by reason of the use or misuse by Buyer or third parties of said products. To the extent said products may be considered“Consumer Products,” as defined in Section 101 of the Magnuson-Moss warranty-Federal TradeCommissionImprovementAct,HeatcraftRefrigerationProducts LLC makes no warranty of any kind, express or implied, to“Consumers,” except as specifically set forth above and on the face hereof.

The Equipment Dealer may purchase for the Owner at the time of the original invoice of the equipment a Three-Year Limited Replacement Compressor Warranty. This entitles the owner to be reimbursed for the cost of a replacement compressor, during the third through fifth year of the life of the compressor.

The warranty program functions similarly to the standard warranty offered. When a compressor failure occurs and the unit is exchanged “over the counter”at the authorized wholesaler outlet a salvage credit is issued along with the invoice for the new compressor. Return copies of both the credit and invoice to the Equipment Dealer along with the model and serial number of the condensing unit. The Equipment Dealer will process this claim with the Manufacturer and subsequently reimburse the Owner for the cost of the new compressor.

This warranty covers the actual compressor only and does not extend to any labor, trip charges, crane rental, taxes or additional parts, refrigerant or processing/handling charges required to make the unit operational.

PRO3 Side Mount Packaged Refrigeration System Installation and Operations Manual, May 2008

3

Image 23
Contents PRO3 Side Mount Packaged Refrigeration System Table of Contents PRO3 Side Mount Packaged Refrigeration System Installation RequirementsAccess Requirements InspectionInstallation Method #1 Installation ProceduresPlaces Installation Method #220.00 CamlocksRigging Rigging holesMinutes Defrost Termination Set Point Refrigeration Sequence of OperationElectrical Connection Coolers Air-defrost OperationFlashing Front Panel CommandsButton Command Use of LEDsContinuous cycle Hidden MenuMain Functions To unlock the keyboardDefrost ParametersRegulation DisplayMaximum How to Use the Hot KeyAlarms Fans XR60CX onlyOther Messages Alarm SignalsTechnical Data Alarm RecoveryConnections Service InformationMaintenance System Standard Maintenance GuidelinesReverse process to replace drain pan Drain Pan RemovalRefrigeration Controller Large CabinetRefrigeration Installation and OperationsManual Electric Defrost Small Cabinet Temperature CoolerSide Mount Packaged Refrigeration System208-230V/1 PHASE/60HZ Installation and OperationsPerformance, Capacities and Specifications Diagram 6 Dimensions Small Cabinet 1-fan Side View DimensionsDiagram 5 Dimensions Small Cabinet 1-fan Top View Diagram 9 Dimensions Large Cabinet 1-fan Side View Diagram 8 Dimensions Large Cabinet 2-fan Top ViewDependable. Versatile. Courteous Replacement Parts byRight source. Right parts. Right now Optional Three-Year Extended Compressor Warranty Warranty StatementWest Park Place Blvd., Stone Mountain, GA Heatcraft Refrigeration Products LLC

PRO3 specifications

Heatcraft Refrigeration Products PRO3 is an innovative line of refrigeration solutions designed to meet the dynamic needs of various commercial environments. Renowned for its energy efficiency, reliability, and user-friendly features, the PRO3 series is a game changer in the realm of temperature control.

One of the standout features of the PRO3 is its advanced microprocessor control system. This technology allows for precise temperature management, ensuring that perishable goods are maintained at optimal conditions. The intuitive interface makes monitoring and adjustments hassle-free, further enhancing user convenience.

Another notable characteristic is the PRO3's energy-efficient design. Engineered with the latest sustainable practices in mind, these refrigeration units consume significantly less power than their counterparts. This energy efficiency not only reduces operating costs but also minimizes the environmental impact of refrigeration operations.

The PRO3 series incorporates advanced evaporator and condenser coil designs that maximize heat exchange and cooling performance. This optimizes the refrigeration cycle, contributing to quick recovery times and overall system efficiency. The inclusion of high-performance fans ensures consistent air distribution, preventing temperature fluctuations that could jeopardize product integrity.

Durability is a core attribute of the PRO3. Constructed with high-quality materials, these refrigeration units are designed for long-lasting performance, even in challenging environments. Their robust build ensures they can handle the rigors of daily use in busy commercial settings.

Moreover, the PRO3 series features easy accessibility for maintenance, which is crucial for prolonging the lifespan of the equipment. Maintenance-friendly designs make it straightforward for technicians to conduct service checks and repairs, reducing downtime and enhancing operational efficiency.

The PRO3 also includes customizable options to cater to specific customer needs, such as different sizes and configurations. This versatility makes it ideal for a wide range of applications, from supermarkets to restaurants and storage facilities.

In summary, Heatcraft Refrigeration Products PRO3 stands out with its sophisticated temperature control, energy efficiency, and durable construction. Combining advanced technologies with user-friendly features, it represents a modern solution for commercial refrigeration, ensuring optimal performance and product preservation.