Heatcraft Refrigeration Products H-IM-82C installation instructions Warranty Statement

Page 25

PRO3 Top Mount Packaged Refrigeration System Outdoor

Warranty Statement

Heatcraft Refrigeration Products LLC warrants to its direct purchasers

thatthe product,exceptServiceParts,manufacturedbyHeatcraft Refrigeration Products LLC shall be of a merchantable quality, free of defects in material or workmanship, under normal use and service for a period of two (2) years from date of original installation, or thirty (30) months from date of shipment by Heatcraft Refrigeration Products LLC, whichever first occurs. Service Parts, for product out of original warranty, should be so warranted for a period of twelve

(12)months from date of shipment. Any product covered by this order found to Heatcraft Refrigeration Products LLC's satisfaction to be defective upon examination at Heatcraft Refrigeration Products LLC's factory will, at Heatcraft Refrigeration Products LLC's option, be repaired or replaced and returned to Buyer via lowest common carrier, or Heatcraft Refrigeration Products LLC may at its option grant Buyer a credit for the purchase price of the defective article. Upon return of a defective product to Heatcraft Refrigeration Products LLC's plant, freight prepaid, by Buyer, correction of such defect by repair or replacement, and return freight via lowest common carrier, shall constitute full performance by Heatcraft Refrigeration Products LLC of its obligations hereunder.

Hermetic compressors furnished by Heatcraft Refrigeration Products LLC are subject to the standard warranty terms set forth above, except that motor compressor replacements or exchanges shall be made through the nearest authorized wholesaler of the motor compressor manufacturer (not at Heatcraft Refrigeration Products LLC's factory) and no freight shall be allowed for transportation of the motor compressor to and from the wholesaler. The replacement motor compressor shall be identical to the model of the motor compressor being replaced. Additional charges which may be incurred throughout the substitution of other than identical replacements are not covered by this warranty.

The foregoing is in lieu of all other warranties, express or implied, notwithstanding the provisions of the uniform commercial code, the Magnuson-MossWarranty-FederalTrade Commission Improvement Act, or any other statutory or common law, federal or state.

Heatcraft Refrigeration Products LLC makes no warranty expressed or implied, of fitness for any particular purpose, or of any other nature whatsoever, with respect to products manufactured or sold by Heatcraft Refrigeration Products LLC hereunder, except as specifically set forth above and on the face hereof. It is expressly understood and agreed that Heatcraft Refrigeration Products LLC shall not be liable to buyer, or any customer of Buyer, for direct or indirect, special, incidental, consequential or penal damages, or for any expenses incurred by reason of the use or misuse by Buyer or third parties of said products. To the extent said products may be considered "Consumer Products,' as defined in Section 101 of the Magnuson-Moss warranty-FederalTrade Commission Improvement Act, Heatcraft Refrigeration Products LLC makes no warranty of any kind, express or implied, to "Consumers," except as specifically set forth above and on the face hereof.

This equipment is designed to operate properly and produce the rated capacity when installed in accordance with good refrigeration industry practices.

The following conditions should be adhered to when installing this unit to maintain the manufacturers warranty:

(a)The power supply to the unit must meet the following conditions:

A. Three phase voltages must be +/- 10% of nameplate ratings. Single phase must be within +10% or -5% of nameplate ratings.

B. Phase imbalance cannot exceed 2%.

(b)All control and safety switch circuits must be properly connected according to the wiring diagram.

(c)The factory installed wiring must not be changed without written factory approval.

Optional Three-Year Extended Compressor Warranty

The Equipment Dealer may purchase for the Owner at the time of the original invoice of the equipment aThree-Year Limited Replacement Compressor Warranty. This entitles the owner to be reimbursed for the cost of a replacement compressor, during the third through fifth year of the life of the compressor.

The warranty program functions similarly to the standard warranty offered.When a compressor failure occurs and the unit is exchanged "over the counter" at the authorized wholesaler outlet a salvage credit is issued along with the invoice for the new compressor. Return copies of both the credit and invoice to the Equipment Dealer along with the model and serial number of the condensing unit. The Equipment Dealer will process this claim with the Manufacturer and subsequently reimburse the Owner for the cost of the new compressor.

This warranty covers the actual compressor only and does not extend to any labor, trip charges, crane rental, taxes or additional parts, refrigerant or processing/handling charges required to make the unit operational.

Since product improvement is a continuing effort,

we reserve the right to make changes in specifications without notice.

2175 West Park Place Blvd. • Stone Mountain, GA 30087

(800)321-1881 • www.heatcraftrpd.com H-IM-82C-0910

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents PRO 3 Top Mount Packaged Refrigeration System Cooler Electric Defrost Systems Performance / Electrical Data Cooler Air Defrost SystemsFreezer Electric Defrost Systems For PSC, E for EC motors on evaporator section onlySee reference on Dimensional DiagramsTop View One System Recommended Unit Placement For PTT ModelsTop View Two Systems MinGeneral Safety Information Access RequirementsControl Factory Default Settings RiggingDrain Line Standard Installation ProcedurePTT Models On 2 fan modelsCurb placed on roof of walk-in cooler Maintenance Service InformationSystem Standard Maintenance Guidelines Refrigeration Sequence of OperationRefrigeration/Defrost Sequence of Operation Model PTT Low Temperature Models EZY Setting =1Status Compressor Condenser Evaporator Defrost If unit shows OFF, depressModel PTT High Temperature Models EZY Setting =3 Model PTT Medium Temperature Models EZY Setting =2Off Defrost is terminated Programming the Pjezc Carel Electronic Controller Installation and RemovalDisplay Electrical ConnectionsOutput Not FittedKeypads Preliminary ConfigurationsFunctions Available from Keypad Temperature Control Temperature DisplayAlarm Table of Alarms and SignalsRapid Parameter Set Selction EZY CodeData Error Description of the Main Signals and AlarmsAccessing the type F parameters Setting the Default ParametersAccessing the type C parameters Modifying the ParametersProblem Cause Checks TroubleshootingSet 1 Low Temperature Models L6 w/ -10 F Set Point Device SetupSet 2 Medium Temperature Models M6 w/ 34 F Set Point Set 3 High Temperature Models H6 w/ 38 F Set PointProblem Possible Causes Possible Corrective Steps System Troubleshooting ChartRight source. Right parts. Right now Replacement Parts byDependable. Versatile. Courteous WiriInformation.5g Defrost Systems Single PhaseTemp Medium Wiring InformationModel PTT072M6BE RevDiagram 3. Wiring Diagram Cooler Air Defrost Systems Single PhaseSystem, Typical High Temp ForOptional Three-Year Extended Compressor Warranty Warranty StatementWest Park Place Blvd., Stone Mountain, GA Heatcraft Refrigeration Products, LLC

H-IM-82C specifications

Heatcraft Refrigeration Products has long been a trusted name in the refrigeration industry, dedicated to providing innovative solutions for commercial cooling needs. One of their standout products is the H-IM-82C unit, a remarkable addition to the line that exemplifies reliability, efficiency, and advanced technology.

The H-IM-82C is engineered with exceptional features that cater to various commercial applications. It utilizes a reliable hermetic compressor specifically designed for durability and energy efficiency. This compressor ensures optimal performance while minimizing power consumption, which can lead to significant savings on energy bills over time. Additionally, the unit boasts a high-performance evaporator coil that augments cooling efficiency by maximizing heat transfer. This design feature allows for quicker cooling times, making it ideal for environments that require precise temperature control, such as food storage and preparation areas.

Another notable characteristic of the H-IM-82C is its robust insulation. The unit employs high-density foam insulation that not only enhances energy efficiency but also prevents condensation and frost build-up. This insulation method helps maintain consistent internal temperatures, which is crucial for preserving the quality of perishable goods.

Safety and monitoring technologies are also integral to the H-IM-82C's design. The unit is equipped with advanced electronic controls that facilitate easy temperature adjustments and greater operational oversight. Users can benefit from real-time monitoring and alerts, helping to ensure compliance with food safety regulations.

Moreover, the H-IM-82C is designed with versatility in mind. It can be installed in a variety of configurations, whether horizontally or vertically, allowing for seamless integration into existing systems. Its compact design is another advantage, saving space while still delivering exceptional cooling performance.

Overall, the Heatcraft H-IM-82C is a commendable option for businesses seeking a reliable refrigeration solution. With its energy-efficient compressor, advanced insulation, and user-friendly controls, it effectively balances performance and cost-effectiveness, making it a preferred choice in the competitive landscape of commercial refrigeration. Whether for a restaurant, supermarket, or food processing facility, the H-IM-82C delivers the quality and reliability that Heatcraft is known for, ensuring peace of mind for operators and optimal conditions for stored products.
Top Page Image Contents