IKEA FC213/18 manual What to do if…, Top compartment, To remove the frost, do these steps

Page 10

ENGLISH

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer cas- ing of this appliance is only cleaned with warm water with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains supply.

Defrosting of the refrigerator

Frost is automatically eliminated from the

evaporator of the re- frigerator compart- ment every time the

motor compressor stops, during normal use. The defrost water drains out through a trough into a special

container at the back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the de- frost water drain hole in the middle of the re- frigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provi- ded, which you will find already inserted into the drain hole.

Defrosting the freezer

A certain amount of frost will always form on the freezer shelves and around

the top compartment.

Important! Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.

To remove the frost, do these steps:

What to do if…

Caution! Before troubleshooting, disconnect the power supply.

Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.

10

1.Switch off the appliance.

2.Remove any stored food, wrap it in sever- al layers of newspaper and put it in a cool place.

3.Leave the door open.

4.When defrosting is completed, dry the in- terior thoroughly and refit the plug.

5.Switch on the appliance.

6.Set the temperature regulator to obtain the maximum coldness and run the appli- ance for two or three hours using this set- ting.

7.Reload the previously removed food into the compartment.

Warning! Never use sharp metal tools to scrape off frost from the evaporator

as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life.

Periods of non-operation

When the appliance is not in use for long pe- riods, take the following precautions:

1.Disconnect the appliance from electricity supply.

2.Remove all food.

3.Defrost, if foreseen

4.Clean the appliance and all accessories.

5.Leave all doors ajar to prevent unpleas- ant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power fail- ure.

Important! There are some sounds during normal use (compressor, refrigerant circulation).

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Udden GB FC213/18Page ENGLISH4 Contents Safety informationEnglish Operation Appliance must not be located close to radiators or cookersFirst use Cleaning the interiorDaily use Freezing Calendar Helpful hints and tipsHints for energy saving Care and cleaning Important! Take care of not to damage the cooling systemTop compartment What to do if…To remove the frost, do these steps Ates continually Rectly Set a higher temperatureFloor Refer to Closing the doorTechnical data InstallationPositioning How long is the Ikea guarantee valid? Environmental concernsEnglish How to reach us if You need our service Country Phone number Call Fee Opening time Page Page 200383691-A-402010 Inter Ikea Systems B.V AA-499719-1

FC213/18 specifications

The IKEA FC213/18 is a versatile furniture piece designed to meet the modern needs of both functionality and aesthetics in living spaces. With a sleek, minimalist design, the FC213/18 offers an impressive blend of practicality and style, making it an ideal choice for a variety of interior settings, from homes to office spaces.

One of the standout features of the FC213/18 is its modular design. This allows users to customize the arrangement and functionality of the unit to best fit their space requirements. The furniture is available in various configurations, ensuring that it can adapt to different room layouts, whether it’s a small apartment or a spacious office environment. The versatility extends beyond its layout, as it can serve multiple purposes, such as storage, display, and even seating.

The materials used in the construction of the FC213/18 are environmentally friendly, embodying IKEA's commitment to sustainability. Made from high-quality particleboard, this unit ensures durability while maintaining a lightweight profile for easy rearrangement. The surface is finished with a veneer that not only enhances its visual appeal but also makes it resistant to scratches and stains, ensuring longevity in daily use.

Another characteristic that elevates the FC213/18 is its integration of smart storage solutions. The design incorporates cleverly concealed compartments and shelving, effectively maximizing space without compromising aesthetics. This feature is especially beneficial in smaller living areas where efficient use of space is paramount. The open shelving allows for decorative displays while keeping essential items within reach, promoting an organized environment.

In terms of assembly, the FC213/18 comes with clear instructions and minimal tools required, making it user-friendly for those who may lack experience in DIY projects. The easy-to-assemble nature of IKEA products is a hallmark feature, ensuring customers can enjoy their new purchase without excessive hassle.

In conclusion, the IKEA FC213/18 exemplifies modern furniture design with its modular capabilities, sustainable materials, smart storage solutions, and ease of assembly. This piece not only meets the functional demands of today’s households but also adds a touch of sophistication and style to any room. It is ideal for individuals who value both practicality and design in their living spaces, making it a worthwhile investment for modern consumers.
Top Page Image Contents