Marvel Industries 8SBARE specifications E R At I O N

Page 5

O P E R AT I O N

figure 3

Start Your Appliance

Your appliance will start upon initial plug-in. The LED will flash amber upon initial plug-in due to your unit being powered-on at the factory to verify performance and then powered-off. The Sentry system senses a power outage has occurred and relays this information to you when you initially power-up your appliance. This is normal and pressing the “ON/OFF” button will reset this alarm function.

If your appliance’s control has been shut-off i.e., unit plugged in, interior lights operate, display blank, unit must be turned on. To turn on your appliance, push and hold for 5 seconds, the “ON/OFF” button located on the display panel. (See figure 3) Once loaded with wine bottles, allow at least 48 hours for the unit to stabilize before making any adjustments to the initial setting.

Set Your Temperature Mode

This product can display either Fahrenheit or Celsius. To do this press the ”°F/C“ button on display panel.

Set the Controls

The available temperature range of the unit is from 40° to 65°F. The temperature set-point is initially set in the factory at 43°F. The temperature set-point can be lowered or raised by first pushing the “Set” button on the display pad. A “SET” icon will be displayed. This icon will turn off 10 second after completing your adjustments. Pushing either the “Warmer” or “Colder” buttons located on the inside of the unit on the display pad will raise or lower the set temperature by one degree F or C (depending on your setting). As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.

Adjustable Temperature Control

The temperature control is fully adjustable from 40° to 65°F. The range allows flexibility of temperature preferences and provides the ideal wine aging, storing and serving temperatures. Temperature range will average between 50 to mid 60’s in the upper section and 40 to 50’s in the lower section. Adjusting the “Warmer” or “Colder” buttons will affect both zones accordingly. The display temperature will be reflective of temperatures in the

middle section of the unit. See “Loading Tips and Suggestions” on the next page for information regarding glass shelf and wine rack configuration.

Interior Light and Switch

The interior light makes it easy to view your wine labels and enhances the display of your collection. To engage the display light, press the “Light” button on the display panel. The light will come on and stay on with the door closed. To disable the display light, press the “Light” button again. The light will always come on when the door is opened.

Warning Alarms

Your beverage center has been fitted with a Sentry system. This sentry will let you know if your unit is not functioning properly for optimum wine storage.

Door Ajar Alarm

If the door has been left open for over 5 minutes the alarm will sound and the LED will flash green. This will stop as soon as the door is closed.

High and Low Temperature

If your unit reaches temperatures outside normal operating temperatures for your set point for about one (1) hour duration, an alarm will sound and the LED will flash red. This will warn you that your wines have seen temperatures that may not be conducive for long term storage.

Power Failure

If your unit experiences a power failure the LED will flash amber until the alarm is reset.

Reset Alarms

Press the “ON/OFF” button for approximately one second. This will reset all audible and display alarms.

Sabbath Mode

 

Your appliance is equipped with a Sabbath mode.

 

By activating this mode you will be disabling all

 

displays, audible alarms and lights. The system will

 

be overridden with a random control. To activate the

 

Sabbath mode press and hold the “Set” button while

 

pressing the ”°F/C“ button 7 times within 7 seconds.

 

To disable the Sabbath mode repeat the process.

 

The Sabbath mode will deactivate after 96 hours.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Operation and Maintenance Instructions Page TA RT I N G O U T Undercounter 8SBARE Beverage SpecificationsRemove Packaging Exterior DamageS TA L L AT I O N Ideal Ambient Temperature RangeE R AT I O N Insert Wine Bottles P L I a N C E F E AT U R E SLoading Tips and Suggestions Roll-out ShelvesEvent of a Power Failure Light Tube ReplacementCondenser CabinetBefore Calling for Service TroubleshootingProblem Possible Causes/Solutions Help Prevent TragediesHow to Obtain Service If You Do Need ServiceTA I N I N G S E RV I C E For Your RecordsRvel Industries P.O. Box Richmond, Indiana 47375-0997 Phone WA R R a N T YT E S W. l i f e l u x u r y m a r v e l . c o m

8SBARE specifications

Marvel Industries has made significant strides in the realm of innovative technology with its latest product, the 8SBARE. This cutting-edge device is a testament to the company’s commitment to pushing the boundaries of what is possible in the world of consumer electronics. The 8SBARE encompasses a range of features and technologies that cater to a wide array of users, from tech enthusiasts to everyday consumers.

One of the standout features of the 8SBARE is its robust performance capabilities. Equipped with a high-powered processor, the device ensures seamless multitasking and rapid execution of demanding applications. Whether it’s for gaming, video editing, or running advanced software, the 8SBARE handles it all with ease, making it a versatile tool for professionals and casual users alike.

The device also boasts an impressive display technology. With a state-of-the-art OLED screen, users can expect vibrant colors and deep blacks that enhance the overall viewing experience. This feature is particularly beneficial for content creators who rely on accurate color representation, as well as for gamers who desire immersive visual experiences.

In terms of connectivity, the 8SBARE comes equipped with the latest wireless technologies. It supports Wi-Fi 6 and Bluetooth 5.2, ensuring fast and reliable connections for streaming, gaming, and other online activities. This seamless integration into wireless ecosystems makes the device an excellent choice for users who prioritize connectivity.

Another notable aspect of the 8SBARE is its durability and design. Marvel Industries has prioritized a sleek and modern aesthetic while also ensuring the device is built to withstand everyday wear and tear. The materials used in the construction of the 8SBARE are both lightweight and strong, making it a portable option that doesn’t compromise on quality.

Furthermore, the 8SBARE features advanced security technologies, including facial recognition and biometric sensors. These enhancements provide users with peace of mind, knowing that their data and devices are protected from unauthorized access.

Lastly, Marvel Industries has integrated a long-lasting battery into the 8SBARE, allowing for extended usage without frequent recharging. With energy-efficient technologies, users can engage in their favorite activities without the constant worry of running low on battery life.

In summary, Marvel Industries' 8SBARE stands out in the competitive tech landscape with its powerful performance, stunning display, robust connectivity, durable design, enhanced security, and impressive battery life. It represents a significant leap forward in consumer electronics, catering to a diverse audience and setting a new standard for future innovations.
Top Page Image Contents