EM-900S & 900P Operations | Multiquip guide

PADDLE SHAFT BEARING

The paddle shaft in the Essick Mixer rotates in sealed ball bearings requiring no additional lubrication.

BEARING BRACKET

Grease the bearing bracket every month.

COUNTERSHAFT

The countershaft rotates on two self-aligned pillow block bearings. Grease these every 40 hours using grade #1 Lithium Base grease.

GEAR ALIGNMENT

The countershaft and driven pinion are mounted on a slotted base. To align gears, loosen pillow block mounting bolts and move them until the necessary alignment has been made.

GEAR LUBRICATION

The surface of the pinion and the bull gear should be very lightly greased every 250 hours.

IMPORTANT! AVOID OVER-GREASING.

EXCESS GREASE WILL ACCUMULATE

CONTAMINATES AND CAUSE

PREMATUREWEAR.

EM-900S & 900P — OPERATIONS

IMPORTANT — DRUM HEAD SEAL CARE

On each end of the mixing drum is a drum head containing self adjusting paddle shaft seals. These seals consist of packing rings, split glands and spring actuated adjusters. A properly maintained seal prevents material from working around the paddle shaft, causing excessive wear. The following is a suggested procedure of maintenance for protection of the paddle shaft and bearings:

A. Keep the drum head clean of plaster built up, so the spring adjusters will be free to work.

B. Replace with one new ring of packing and waterproof grease when split gland or pressure plate is about to bottom out against the end of the drum.

New Packing

When the old packing is to be completely replaced, coat shaft and packing generously with a good grade of waterproof grease and insert packing rings. Tighten the two spring adjuster nuts on each end until the spring is compressed to 1¾ inches or the top of the adjusting nut is even with the top of the drum head.

Also, whenever the paddle shaft is removed, new waterproof grease should be packed around the ball bearings in the drum heads before reinstalling the shaft. Fill the cavity completely.

DRUM GRILL

The drum opening is covered by a steel grill that is hinged for easy cleaning. This grill should be closed at all times when mixer is in use. Do not remove the grill or grill opening bar. Keep the grill clean by washing it down daily.

CAUTION: Stop the engine before allowing anybody to put their hands in the mixing drum.

ESSICK EM-900S & 900P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 9

EM-900S specifications

The Multiquip EM-900S is a robust and efficient electric concrete mixer designed to cater to the needs of construction professionals and DIY enthusiasts alike. Known for its reliability and performance, the EM-900S stands out for its user-friendly features and advanced technologies aimed at enhancing productivity on job sites.

One of the main highlights of the EM-900S is its powerful 1.5 horsepower electric motor. This motor is designed for optimal performance, ensuring that the mixer can handle various concrete mixes with ease. Its direct drive system minimizes maintenance needs and prevents slippage, making it a dependable choice for users.

The EM-900S features a large 9-cubic-foot capacity drum, allowing for substantial mixing of materials. This generous size means fewer batches are required, saving both time and effort. The drum is constructed from high-quality steel, ensuring durability and longevity in demanding work environments.

Another notable characteristic is the EM-900S's ergonomic design. Equipped with a comfortable handle and well-balanced frame, the mixer is easy to maneuver on job sites. This design not only enhances usability but also improves safety during operation, allowing operators to mix and pour materials efficiently.

The EM-900S is also equipped with a unique tilting mechanism. This allows for precise control when pouring concrete, enabling users to achieve an accurate pour while minimizing waste. The mixer can be tilted at various angles to accommodate different project requirements.

For added convenience, the EM-900S comes with large pneumatic wheels that enhance mobility across rough terrain. These heavy-duty wheels provide excellent traction and make it easy to transport the mixer to different locations without hassle.

Additionally, the EM-900S boasts an integrated safety switch and emergency stop feature, ensuring that users can operate the machine safely under various conditions. This focus on safety is a crucial consideration for professionals working in the construction industry.

Overall, the Multiquip EM-900S electric concrete mixer combines powerful performance, user-friendly features, and advanced design elements. With its ample capacity, durable construction, and safety features, the EM-900S is an ideal choice for both commercial and residential projects, enhancing efficiency and productivity on the job site. Whether mixing concrete for foundations, slabs, or other applications, the EM-900S is built to deliver reliable results every time.