Installing Your Beverage Center

Select Location

The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources. Best perfor- mance will be maintained when installed within the follow- ing parameters:

Ideal Ambient Temperature Range

Built-In	65-80 °F

Free-Standing	65-90 °F

Cabinet Clearance

Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions.

Leveling Legs

Adjustable legs at the front corners of the unit should be set so the unit is firmly positioned on the floor and the front is raised just enough so that the door closes easily when opened about halfway.

Turn leveling legs clockwise to raise unit, counterclockwise to lower it.

Door Hinge Reversing

You can change the door swing from right- to left-hand very easily. Simply unscrew the top and bottom hinge pin, lift the door off the bottom hinge, and switch the hinges to the other side. Screw the hinge pin back in what is now the bottom hinge, unscrew the hinge pin in what is now the top hinge, replace door, and screw the pin back in the top hinge.

Figure 1

Electrical Plug Optional Location: Cutout shown for electrical outlet which can be located in adjacent cabinetry.

Power Supply Cord with 3-prong grounding plug

	Grounding Type Wall
Cord may be flush	Receptacle
Cord may be flush
with back wall

Figure 2

Electrical Connection

Use nominal 115 VAC, 60 Hz only. DO NOT USE AN EXTENSION CORD.

Grounding Method

This product is factory equipped with a power supply cord that has a three-pronged, grounded plug. It must be plugged into a mating grounding type receptacle in accor- dance with the National Electrical Code and applicable lo- cal codes and ordinances (see Figure 1). If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to exchange the existing receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. The third ground prong should not, under any circumstances, be cut or removed (see Figure 2). All U.L. listed refrigerated prod- ucts are equipped with this type of plug.

6BARM, 3BARM specifications

Marvel Industries has made a significant mark in the field of industrial automation with its innovative offerings in the realm of robotics. At the forefront of their advanced product line is the 3BARM and 6BARM, two cutting-edge robotic arms that have been meticulously designed to enhance operational efficiency across a diverse array of industries.

The 3BARM, with its three joints, offers exceptional versatility in movement while maintaining a compact design, making it ideal for tasks that require precision in tight spaces. The three articulated segments allow for a wide range of motion, enabling it to perform intricate assembly tasks, intricate material handling, and even delicate pick-and-place operations. The integration of high-torque servomotors in the joints ensures smooth and responsive movements, while advanced sensors provide real-time feedback for enhanced accuracy.

On the other hand, the 6BARM boasts six degrees of freedom, offering unparalleled dexterity appropriate for complex manufacturing environments. This robotic arm can replicate the full range of human arm movements, making it suitable for tasks such as welding, painting, and intricate assembly lines. With the ability to reach difficult angles and positions, the 6BARM provides an adaptable solution that can accommodate various applications, ultimately resulting in increased productivity and reduced operational costs.

Both models leverage state-of-the-art technologies including artificial intelligence and machine learning algorithms. These capabilities allow them to learn from their environments, seamlessly integrating into existing workflows and optimizing processes. The onboard vision systems enable the robots to recognize and adapt to their surroundings, enhancing their autonomous capabilities.

Additionally, Marvel Industries has prioritized safety in its design philosophy. The 3BARM and 6BARM are equipped with multiple safety features including collision detection systems and emergency stop mechanisms, ensuring a secure operational framework.

With their user-friendly interface and modular design, these robotic arms are easily programmable, making them attractive to both seasoned operators and newcomers to automation. As industries continue to evolve towards more automated solutions, Marvel Industries' 3BARM and 6BARM embody the future of robotic innovation, positioning businesses to thrive in a competitive landscape.