S Ta L L At I O N, Select Location | Marvel Industries 60RD specs

I N S TA L L AT I O N

Select Location

The proper location will ensure peak perform- ance of your drawer refrigerator. Choose a loca- tion away from heat and out of direct sunlight. Best performance will be maintained when installed within the following parameters:

Ideal Ambient Temperature Range*

built-in55-80°F

freestanding55-90°F

* Drawer Refrigerator will not perform correctly in ambient temperatures less than 55°F.

Cabinet Clearance

Electrical Connection

Check the serial nameplate for the correct power supply. Use only the electrical power supply spec- ified on the serial nameplate. Do not use an exten- sion cord.

Ventilation is required for the bottom front section of the unit where the grille is located. Keep this area open and clear of any obstructions. Adjacent cabi- nets and countertop can be installed on top, back and sides of the unit as long as grille and drawer access remain unobstructed. An opening of 24” is required between cabinets with a depth of 24”.

Adjacent cabinets and countertop can be installed on top, back and sides of the unit as long as the grille and drawer access remain unobstructed. Ventilation is required for the bottom front section of the unit where the grille is located. Keep this area open and clear of any obstructions.

Make certain that the leveling legs supplied with the drawer refrigerator are installed according to

23.88

15.13

3.5

25.82

23.88

21.81

34.00

the instructions. Leveling adjustments can be made by raising or lowering the glides on the bot- tom of the unit.

DISCONNECT POWER SOURCE BEFORE

ADJUSTING LEVELING LEGS

Important Safety Issue

A cabinet “anti-tip” device is mounted to the back of your drawer refrigerator. If your installation is a built-in undercounter application, you do not need to apply this feature. If your installation is a free- standing application with no counter top directly above the top of the drawer refrigerator, you must apply this feature to prevent the unit from tipping forward when the drawers are pulled out. The “anti-tip” device is attached at the back of each cabinet. Please see installation instructions sup- plied with the “anti-tip” device.

Grounding Method

This drawer refrigerator is equipped with a power supply cord with ground. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. It is the customer’s responsibility to provide the proper grounding type receptacle. Do not alter the plug in any way.

THIS UNIT SHOULD NOT, UNDER ANY CIRCUMSTANCES, BE UNGROUNDED.

60RD specifications

Marvel Industries has been at the forefront of innovative solutions in the automotive sector, and their latest offering, the 60RD, exemplifies their commitment to creating a sophisticated and efficient vehicle. Designed to cater to both commercial and personal use, the 60RD combines cutting-edge technology with practical functionality.

One of the main features of the Marvel 60RD is its advanced powertrain. The vehicle is equipped with a hybrid engine that pairs an electric motor with a high-efficiency internal combustion engine. This integration not only optimizes performance but also significantly enhances fuel efficiency, making it an environmentally friendly choice. The hybrid system provides instant torque and smooth acceleration, delivering an engaging driving experience while minimizing emissions.

Safety is a critical aspect of the 60RD's design. Marvel Industries has incorporated an array of advanced safety technologies, including an adaptive cruise control system, lane departure warning, and automatic emergency braking. The vehicle is equipped with a 360-degree camera system that enhances driver visibility and awareness, giving peace of mind during city driving and complex maneuvers.

Inside the cabin, the 60RD showcases a modern and ergonomic design. The intuitive infotainment system features a large touchscreen display with smartphone integration, allowing drivers to seamlessly access navigation, music, and communication applications. Premium materials are used throughout the interior, ensuring a comfortable and upscale environment for both drivers and passengers.

Another standout characteristic of the 60RD is its cargo capacity. Built with versatility in mind, the vehicle offers configurable seating and ample storage solutions, enabling it to adapt to various transportation needs. Whether used for transporting goods or accommodating a larger group of passengers, the 60RD’s thoughtfully designed space maximizes usability.

Furthermore, Marvel Industries continues to lead with innovation by integrating advanced connectivity features into the 60RD. With built-in 4G LTE capability, drivers can enjoy high-speed internet access on the go, linking to smart devices and enhancing the ultimate driving experience. The vehicle is compatible with various software updates and features that can be accessed and controlled remotely, reflecting the modern consumer's demand for interconnected technology.

In summary, the Marvel Industries 60RD stands out with its hybrid efficiency, robust safety features, comfortable interior, flexible cargo space, and superior connectivity options. This vehicle not only meets the demands of today's drivers but also pushes the boundaries of automotive technology, reinforcing Marvel Industries' reputation as an industry innovator.