3
HOW TO USE YOUR BEER CHILLER™ (Continued)
INSTRUCTIONS
First, find a stable surface near an electrical outlet before starting. Make sure you have not blocked ventilation needed for proper running of the unit and that your cord is away from any water source. If needed, it is acceptable to use an extension cord.
FOR BEST RESULTS, MAKE SURE YOUR 5 LITER KEG IS ICE COLD FROM THE FRIDGE OR HAS BEEN CHILLING FOR 12 HOURS IN THE BEER CHILLER™ TO INSURE BEST TASTE.
USING PRESSURIZED™ 5 LITER KEG SUCH AS THOSE USED BY HEINEKEN tm.
Open the large top lid on your BEER CHILLER™. Set the Keg down inside, so that the spigot extrudes through the small designed opening in the front top of the BEER CHILLER™ and close the lid. The small window in the top of the unit opens to allow you to lift the tap vat tab up when you want to dispense beer. Plug the cord into your chosen power source and you are ready to enjoy. (See illustration A, below)
Using one hand, place your glass or mug up under the spigot. With your other hand pull the tab (extruding from the top opening) forward to pull and fill your glass. Release when you have a desired amount of beer. (See Illustration B, below) follow instructions on keg of manufacturer.
AB
USING GRAVITY 5 LITER KEGS SUCH AS THOSE USED BY COORS™.
Open the large top lid on your BEER CHILLER™ and open the small clear window located on the front of the bottom chrome face. Set the Coors™
Using one hand, place your glass or mug under the spigot at the front base of the keg. With your other hand, pull the tab forward to pull and fill your glass. Release when you have a desired amount of beer. (See illustration D, below)
CD