Freezer Compartment

Drawer

Guides

Drawer and Cover Removal

Drawers will stop before coming all the way out of the refrigerator to help prevent contents from spilling onto the floor. Drawers can easily be removed by tilting up slightly and pulling past the “stop” location.

To remove the glass shelf above the top drawer,

first remove the

top drawer and any food on the

shelf. Then, reach in, push the rear of the glass up until it

touches the bottom of the lower light shield. Then push the shelf back (approx. 13 mm) until it clears both the front corner retainers.

To replace the glass shelf, reverse the steps.

When replacing the drawers, make sure you slide them through both drawer guides on the right side.

Then press down on the top of the shelf to make sure the shelf sits firmly on top of both drawer guides.

To remove the drawers when the fresh food compartment door cannot be opened fully, remove the lower bins on the fresh food door.

To remove bins, first remove the

food in the bins. Then, grasping the bin at each end, push in at the bottom as you lift and pull out at the top. Once the bins are removed the drawers will come straight out.

Under Refrigerator

For most efficient operation, you need to keep the area under the refrigerator clean. Turn the temperature control to

“ .” Remove the base grille. Sweep away or vacuum dust that is readily accessible on the condenser coils, then turn the control back on.

For best results, use a brush specially designed for this purpose, available at most appliance parts stores. This easy cleaning operation should be done at least once a year.

Clean the condenser coils at least once a year.

Behind Refrigerator

Care should be taken in moving your refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces. Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side direction may result in damage to the floor covering or refrigerator.

When pushing the refrigerator back, make sure you don’t roll over the power cord or icemaker supply line (on some models).

Light Bulb Replacement

Fresh Food Compartment—Upper Light

1.Unplug refrigerator.

2.Remove the snap-in light shield.

1 3 5 7 9

3.Replace with same size bulb and reinstall the light shield. If you

cannot locate the correct bulb, see your dealer.

Fresh Food Compartment—Lower Light (on some models)

This light is located behind a shield at the rear of the fresh food compartment.

1.Unplug the refrigerator.

2.Grasp the top edge of the shield and lift it up and forward to free its top edge.

3.After replacing with the same size bulb, hook the top of the shield back in place. If you cannot locate the correct bulb, see your dealer.

4.Plug the refrigerator back in.

Freezer Compartment with a Dispenser

1.Unplug the refrigerator.

2.Remove the shelf just below the light shield. (The shelf will be easier to remove if it is emptied first.)

3.Pull the light shield toward you to reach the bulb.

After replacing with same size bulb, reinstall shelf and plug the refrigerator back in.

Care and Cleaning

Refrigerator - Freezer specifications

The Univex Refrigerator-Freezer is a cutting-edge appliance designed to meet the demanding needs of both residential and commercial kitchens. Renowned for its reliability and efficiency, it serves as an essential tool for chefs and home cooks alike. This versatile unit combines the functionalities of refrigeration and freezing into one compact solution, optimizing space without sacrificing performance.

One of the standout features of the Univex Refrigerator-Freezer is its advanced temperature control system. This system ensures that both the refrigerated and frozen compartments maintain precise temperatures, preventing temperature fluctuations that could adversely affect food quality. With adjustable temperature settings, users can easily customize the environment to meet specific storage requirements.

Energy efficiency is a priority in the design of the Univex Refrigerator-Freezer. Equipped with an eco-friendly cooling system, the appliance minimizes energy consumption, which not only helps to reduce utility bills but also aligns with sustainable living principles. The use of high-quality insulation further enhances its energy-saving capabilities, keeping the cold air contained and reducing the need for the compressor to operate frequently.

The unit's interior layout is thoughtfully designed for optimal organization. Adjustable shelving allows users to modify the space according to their needs, making it easy to store a variety of food items. Additionally, the design includes specialized compartments for specific types of food, maximizing storage efficiency while ensuring everything is easily accessible.

Durability is another hallmark of the Univex Refrigerator-Freezer. Constructed from robust materials, it is built to withstand the rigors of daily use in busy kitchens. The stainless steel exterior not only provides a sleek, modern look but also resists corrosion and is easy to clean, ensuring the appliance retains its aesthetic appeal even after years of service.

In terms of technology, the Univex Refrigerator-Freezer boasts a user-friendly digital control panel. This intuitive interface allows for easy temperature adjustments and provides real-time feedback on the appliance's performance. Additionally, some models come with smart technology integration, allowing users to monitor and control the appliance remotely via smartphone apps.

The overall design of the Univex Refrigerator-Freezer reflects a commitment to user satisfaction, combining functionality, efficiency, and durability. Whether used in a bustling commercial kitchen or a home setting, it stands out as a versatile and reliable solution for all refrigeration and freezing needs.