Auto Page ACD-94 manual Setting the Clock, CD Player Error Codes

Page 12

/ ERROR CODES

3.When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage. Make sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other malfunctions.

THEFT DETERRENT

DISC SLOT

LED (30)

RESET BUTTON

(19)

 

 

 

(31)

 

OPERATING INSTRUCTIONS / SETTING THE CLOCK

12

MOUNTING PLATE

CD EJECT

GUIDE (2 PLACES)

BUTTON (27)

FRONT PANEL

PANEL

MOUNTING

PLATE

SETTING THE CLOCK

1.Switch the vehicle ignition and radio “on”.

2.Press the Time/Frequency (T/F) button to call the time display.

3.Within 10 seconds, press and hold the T/F button until a single beep sounds and the time display flashes.

4.With the display flashing, press the Up MANU/SKIP ( ) button to adjust the hours

and A/P indication, or the Down MANU/SKIP ( ) button to adjust the minutes to the correct time.

5.Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the normal indication.

CD PLAYER ERROR CODES

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. If an error code should appear, try ejecting and re-loading the disc into the player. While the disc is out of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the RESET button dmon the unit, but this will also erase the time and pre-set memories.

If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

Image 12
Contents ACD-94 Installation Instructions Installation InstructionsUniversal Installation Procedure Using Mounting Sleeve Installation Using KitsISO Installation Universal Installation Using Mounting SleeveTions Wiring RadioSpeaker Wiring SpeakerPower ON/OFF/ILL Button Select SEL Button Audio Adjust ControlOperating Instructions Bass ControlFRONT/REAR Fader Control Audio Mute Selector MuteBl Band Selector BAND/LOUD To select a radio station, momentarily pessBs Power Level Meter Display Bt Mode Selector ModeBr Vacuum Flourescent Display VFD Bu Disc SlotCm CUE/REVIEW Functions Cn Disc Pause PAUCp Repeat Play Selector RPT Cr Disc Select UP/DOWN D.UP/D.DNCt TIME/FREQUENCY Selector T/F Dn Front Panel Release Button OpenDo Remote Sensor Error Codes Setting the ClockCD Player Error Codes Specifications SpecificationsCD-R and CD-RW Playback Capability CD Changer Controls CD Changer ControlsDu DISC/TRACK Repeat Play RPT El DISC/TRACK Shuffle Play SHFCodes / Remote Control Operation CD Changer Error CodesManual Seek Tuning See Main TUNE/SEEK 9,8 Control SeePlaying MP3 Music Files CD CUE/REVIEW See Main UnitMP3 Controls MP3 Playback Operation Accessing the ID TAG TionLoading AN MP3 Disc Searching the Track DirectlyNavigating from a Root Directory Navigating from a Current DirectoryCare and Maintenance Care and Maintenance Handling Compact DiscsMonth Limited Warranty Warrant YAudiovox Electronics Corp., Hauppauge, NY