Vinotemp VINO6500SSH, VINO4500SSH, VINO8500SSH manual Condensing Unit, Evaporator Unit, Air Sensor

Page 9

1. Condensing Unit

•Place the condensing units WM250-850SCU in a properly ventilated location. If it is not, heat exhausted by the condensing unit will build up and the cooling system will not operate properly.

•Leave minimum 5 feet clearance for the exhaust side and leave minimum 1 foot clearance for the fresh air intake side.

•Condensing unit shall be elevated to avoid possible flooding and shaded from direct sun. It shall not be exposed to temperatures higher than 110 °F or lower than 45 °F (optional low ambient kit for 20 °F).

2. Evaporator Unit

•The WM25-85SFCH evaporator units can be installed outside a wine room.

•Supply and return air flow from the evaporator unit shall be unobstructed for at least 1 foot.

•There is a gravity drain line so that it can not be installed above the evaporator unit. Otherwise a condensation pump must be used.

•If the overall duct length is more or less than 50ft, it is necessary to check the air flow to meet the specified CFM. It may use larger or smaller size ducts or fan speed control to adjust the system refrigeration performance to achieve 8-10°F differential between return air and supply air.

3. Air Sensor

•The air sensor is recommended to place in the wine room. If it is in a return duct, due to the temperature differential the temperature setting needs to be adjusted in order to maintain the proper wine room temperature.

4. Refrigeration Piping and Charging

NOTES: ALWAYS USE THE SUPERHEAT AND SUBCOOLING, PRESSURE READINGS TO CHARGE REFRIGERANT PROPERLY, THE LISTED CHARGES ARE FOR REFERENCE ONLY.

•The installation order starts from condensing unit (including the receiver), liquid line filter-drier, moisture-liquid indicator (sight glass), liquid line, evaporator unit (including liquid line solenoid valve and thermostatic expansion valve or automatic expansion valve), suction line, and returning to condensing unit.

•The subcooling at the condensing unit shall be around 10°F. The charge may be complete when there are no more bubbles forming in the sight glass.

- 8 -

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VINO2500SSH, 4500SSH VINO6500SSH, 8500SSH WINE-MATESplit System Installation, Operation & Care ManualTable of Contents Important Safety Information CFM Cond Unit Feature DescriptionWM25-85SFCH Evaporator Unit WM650-850SCU Condensing Unit Cellar Construction SSH Split System Installation Installer’s InstructionEvaporator Unit Condensing UnitAir Sensor Refrigeration Piping and ChargingModel Refrigeration Liquid Suction Duct Drain Charge Lines Pressure, Superheat and Subcooling ReadingsValve Operation VINO2500 & 4500SSH Wiring Diagram Digital Controller VINO2500 & 4500SSH Electrical Wiring Diagram VtstatVINO6500SSH Electrical Wiring Diagram Vtstat VINO8500SSH Electrical Wiring Diagram VTSTAT, UJ6220Z Use of the adjustable low pressure control if applicable Temperature Setting Temperature Control & Humidity AdjustmentDip-switch description See detail in Vstat instruction Use of the Digital Controller Page Manual Defrost Coil Cleaning Care GuideMoisture Removing User’s Troubleshooting Too long or Unit runningEvaporator IcingCustomer Support Warranty Limited WarrantyService under Warranty Limitation of Implied Warranty

VINO2500SSH, WM-25SFCH, WM-45SFCH, WM-65SFCH, WM-850SCU specifications

Vinotemp is a trusted name in the wine storage industry, offering a range of high-quality wine coolers designed to preserve and enhance the lifespan of your collection. Among their popular models are the Vinotemp VINO6500SSH, VINO4500SSH, VINO8500SSH, WM-85SFCH, and WM-850SCU. Each of these models features advanced technology and thoughtful design elements that cater to both the casual wine enthusiast and the serious collector.

The Vinotemp VINO6500SSH is a standout model that combines sleek aesthetics with superior functionality. Its stainless steel finish not only exudes elegance but also ensures durability. With a generous capacity for up to 65 bottles, this wine cooler boasts a dual-zone temperature control system, allowing you to store red and white wines at their optimal temperatures. The touchscreen control panel makes adjustments easy, while the built-in LED lighting illuminates your collection beautifully.

Next, the VINO4500SSH is designed for those who may have more limited storage space but still want to maintain their wine’s integrity. This unit holds up to 45 bottles and features a similar dual-zone cooling system as its larger counterpart. The VINO4500SSH also includes adjustable shelves, making it easy to accommodate bottles of various shapes and sizes.

For larger collections, the VINO8500SSH is an ideal choice. Capable of holding up to 85 bottles, this model offers expansive storage and precision cooling with its advanced temperature control system. With a stylish glass door and UV shielding, it protects your wines from light damage while allowing you to showcase your collection.

The WM-85SFCH and WM-850SCU models bring a slightly different profile into the mix. The WM-85SFCH features a stainless steel exterior with a sleek design, perfect for modern kitchens or wine cellars. It also offers a spacious storage capacity, ensuring that your wine bottles are adequately chilled and maintained. The WM-850SCU, on the other hand, emphasizes versatility with a unique setup allowing for freestanding or built-in installation.

All of these models come equipped with advanced cooling technologies, silent operation, and energy-efficient systems to guarantee that your wines are stored under perfect conditions. With Vinotemp’s commitment to quality, these wine coolers not only provide optimal storage but also enhance the enjoyment of your wine collection. Whether you're a novice or a seasoned collector, Vinotemp's range of wine coolers has something to offer for everyone looking to preserve their passion for wine.
Top Page Image Contents