Vinotemp WM150-450SCU, VINO-6500SSL, VINO-4500SSL, WM-65SFCL, WM-45SFCL manual Cellar Construction

Page 7

Cellar Construction

This is only a guide and shall be considered as minimum requirements.

All interior walls and floors shall have a vapor barrier and a minimum of R11 insulation. All exterior walls and ceiling shall have a vapor barrier and a minimum of R19 insulation. The vapor barrier shall be installed on the warm side of the insulation. All joints, door frames, electrical outlets or switches and any pipes or vents that go through the enclosure shall be sealed to prevent air and moisture leakage into the room. Concrete, rock, and brick are not insulation or vapor barriers.

Doors shall be of a minimum size, insulated to at least R11 and tightly sealed with high quality weather stripping. Be sure to seal the bottom of the door and fill gap between the door’s frame and wall before installing the cap molding.

In order to maintain 55 °F in the wine cellar, the ambient temperature surrounding the enclosure shall not exceed the temperature of the enclosure by more than 25 °F. No enclosure wall shall receive direct sun or strong wind.

Lighting shall be of low wattage, with a timer to insure lights are not left on when the enclosure is not occupied.

The cooling system will not be able to maintain the proper temperature if fresh moisture-laden air is constantly being introduced to the enclosure. Symptoms of this condition are; unit runs all the time with only a slight reduction in temperature and/or water overflows from the unit. Because of the temperature difference between the inside and outside, very small cracks can allow large amounts of outside air to enter into the enclosure. Please be aware that moisture can pass through solid concrete, paint and wood. Often a newly constructed room contains fresh wood, paint, concrete and other building materials. These materials contain large amounts of moisture. When placed into operation in this type of environment, the system will work harder to remove this extra moisture resulting in increased “run” time.

- 6 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents WINE-MATESplit System Installation, Operation & Care Manual Table of Contents Important Safety Information CFM Cond Unit Feature DescriptionWM15-25SFCL Evaporator Unit WM150-450SCU Condensing Unit Cellar Construction SSL Split System Installation Installer’s InstructionRefrigeration Piping and Charging Condensing UnitEvaporator Unit Air SensorComplaint Possible Causes Pressure, Superheat and Subcooling ReadingsValve Operation Electrical WiringVINO1500-4500SSL Wiring Diagram Digital Controller VINO6500SSL Electrical Wiring Diagram Digital Controller Condensing Unit Troubleshooting Unit not running Temperature Setting Temperature Control & Humidity AdjustmentDip-switch description See detail in Vstat instruction Use of the Digital Controller Page Manual Defrost Care Guide Coil CleaningMoisture Removing User’s Troubleshooting Icing Unit runningToo long or EvaporatorCustomer Support Limited Warranty WarrantyService under Warranty Limitation of Implied Warranty

VINO-1500SSL, VINO-2500SSL, WM-650SCU, WM-450SCU, WM-15SFCL specifications

Vinotemp is renowned for its innovative wine coolers and refrigerators, catering to wine enthusiasts who appreciate the importance of proper storage conditions. The Vinotemp VINO-6500SSL, VINO-4500SSL, WM-65SFCL, WM-45SFCL, and WM-150SCU are standout models in their lineup, each designed with unique features and technologies to meet diverse needs.

The Vinotemp VINO-6500SSL boasts a stunning stainless steel design that not only enhances its aesthetic appeal but also provides durable construction. With a capacity of 6,500 cubic feet, it can accommodate an extensive collection of wine bottles. Its dual-zone cooling system allows users to set different temperatures, ensuring optimal conditions for both red and white wines. The intuitive digital control panel makes it easy to adjust the settings, and the soft LED lighting illuminates the interior while minimizing heat exposure to the wine.

Next in line is the Vinotemp VINO-4500SSL, which shares a similar elegant stainless steel finish and high-quality build. This model is smaller, with a capacity designed to hold around 4,500 cubic feet of wine. It also features a dual-zone cooling system, ideal for the serious collector with a variety of wine types. The double-paned glass door provides UV protection, safeguarding the wine from harmful light exposure, while the adjustable wooden shelves facilitate easy organization.

The WM-65SFCL model is specifically designed for built-in or freestanding installation, making it a versatile addition to any home. With a capacity of 65 bottles, it offers plenty of space while maintaining a compact footprint. This wine cooler also comes equipped with a state-of-the-art cooling system that uses compressor technology, ensuring consistent temperature control. The sleek design includes a stainless steel frame and tinted glass door, blending seamlessly with modern decors.

On the smaller side, the WM-45SFCL provides a compact solution for wine storage, holding up to 45 bottles. This unit features a powerful compressor cooling system, providing reliable temperature maintenance. With its elegant black finish and stainless-steel trim, it is both stylish and functional, fitting conveniently in smaller spaces.

Finally, the WM-150SCU stands out for its impressive capacity, accommodating up to 150 bottles. This oversized wine cooler is perfect for serious collectors or those who host frequent gatherings. The temperature controls allow for precise adjustments, ensuring wines are stored in optimal conditions. The interior includes several adjustable shelves and LED lighting, providing both functionality and style.

Overall, Vinotemp’s wine coolers embody modern design, advanced technology, and practical features, making them perfect for wine lovers seeking to preserve their collections with care and sophistication.
Top Page Image Contents