Vinotemp VINO8500HZD, WM-1500-HTD, WM-8500HTD, VINO3500HZD TOP Exhaust Gasket Cellar Construction

Page 12

Fig. 2.9 TOP EXHAUST GASKET

3. Cellar Construction

This is only a guide and shall be considered as minimum requirements.

All interior walls and floors shall have a vapor barrier and a minimum of R11 insulation. All exterior walls and ceiling shall have a vapor barrier and a minimum of R19 insulation. The vapor barrier shall be installed on the warm side of the insulation. All joints, door frames, electrical outlets or switches and any pipes or vents that go through the enclosure shall be sealed to prevent air and moisture leakage into the room. Concrete, rock, and brick are not insulation or vapor barriers.

Doors shall be of a minimum size, insulated to at least R11 and tightly sealed with high quality weather stripping. Be sure to seal the bottom of the door and fill gap between the door’s frame and wall before installing the cap molding.

In order to maintain 55 °F in the wine cellar, the ambient temperature surrounding the enclosure shall not exceed the temperature of the enclosure by more than 25 °F. No enclosure wall shall receive direct sun or strong wind.

Lighting shall be of low wattage, with a timer to insure lights are not left on when the enclosure is not occupied.

The cooling system will not be able to maintain the proper temperature if fresh moisture-laden air is constantly being introduced to the enclosure. Symptoms of this condition are; unit runs all the time with only a slight reduction in temperature and/or water overflows from the unit. Because of the temperature difference between the inside and outside, very small cracks can allow large amounts of outside air to enter into the enclosure. Please be aware that moisture can pass through solid concrete, paint and wood. Often a newly constructed room contains fresh wood, paint, concrete and other building materials. These materials contain

- 11 -

Page 11 Page 13
Image 12
Page 11 Page 13
Contents WINE-MATECooling Unit Important Safety Information Table of Contents Feature Description Feature DescriptionsDimensions Installation Instruction Cabinet Cutout & Gasket LIPGasket Thread Insert Fastening Bracket & Screw Cabinet Grille VINO3500-8500HZD Room Installation TOP Exhaust Gasket Cellar Construction Electrical Cord Temperature Control & Humidity Adjustment Temperature SettingPage Manual Defrost Coil Cleaning Care GuideMoisture Removing Drain LineTroubleshooting HA alarm BlinkingBeeping High or notWater leak CircuitTripping NoisyVINO1500-2500HZD Wiring Diagram VINO1500-2500HZD Calling Feature Wiring DiagramVINO3500-8500HZD Wiring Diagram Customer Support Warranty Limited WarrantyService under Warranty Limitation of Implied Warranty

VINO1500HZD, VINO2500HZD, VINO3500HZD, WM-8500HTD, WM-1500-HTD specifications

Vinotemp is renowned for its premium wine storage solutions, and their range of wine coolers exemplifies this commitment to quality. Among their diverse products, the Vinotemp VINO8500HZD, WM-1500-HTD, WM-8500HTD, VINO3500HZD, and VINO2500HZD stand out for their impressive features and technologies that cater to wine enthusiasts and collectors alike.

The Vinotemp VINO8500HZD is a spacious wine cooler that can hold up to 85 bottles. Its dual-zone temperature control allows users to store both red and white wines at their optimal temperatures. This model features an elegant design with a stainless steel frame and a glass door that not only provides visibility but also protects wine from harmful UV rays. The adjustable wooden shelves offer flexibility, allowing for easy organization of your collection.

The WM-1500-HTD caters to those who require flexible storage solutions for up to 150 bottles. This unit uses a compressor cooling system, ensuring efficient temperature stability even in fluctuating environments. The touchscreen control panel makes it easy to customize settings, while the interior LED lighting illuminates the bottles without generating heat, further protecting your collection.

The WM-8500HTD shares many features with the WM-1500-HTD but is designed to accommodate up to 85 bottles. With a similar compressor-based cooling technology and reflective, tempered glass doors, this model is perfect for both home and commercial use. Its built-in lock enhances security, making it an excellent choice for retailers or wine bars.

For smaller collections, the Vinotemp VINO3500HZD and VINO2500HZD offer the perfect balance of size and performance. The VINO3500HZD holds up to 35 bottles and features dual-zone cooling, enabling users to store different wine types at their ideal temperatures. The VINO2500HZD, holding 25 bottles, provides a compact yet effective solution for space-limited environments. Both models come with adjustable shelves and a sleek design that complements any decor.

Overall, the Vinotemp range, featuring models like the VINO8500HZD, WM-1500-HTD, WM-8500HTD, VINO3500HZD, and VINO2500HZD, showcases advanced wine preservation technologies, stylish designs, and user-friendly features that cater to any wine lover’s needs. Whether for personal use or commercial establishment, Vinotemp wine coolers are engineered to ensure that wines are stored in optimal conditions, thus enhancing their flavor and longevity.
Top Page Image Contents