Vinotemp VT-6TED-WW, VT-6TED-WB owner manual Electrical Connection, Installation Notes

Page 8

ELECTRICAL CONNECTION

For your protection, this unit is equipped with a 2-conductor cord set that has a molded 2-pin plug, and should be used in combination with a properly connected grounding-type outlet.

It is not recommended to use this cellar with an extension cord or power board. Please ensure that the appliance is plugged directly into the electrical outlet.

INSTALLATION NOTES

Before Using Your Wine Cooler:

Do not place the wine cooler under direct sunlight, in a hot area (i.e. above 80°F) or in a humid place.

Make sure your wine cooler is resting on a flat surface so that there is no risk of bottles being able to tip forward.

Remove all exterior and interior packaging, including protective foam on the door panels. Remember that children are particularly vulnerable to packaging materials and old appliances so discard materials with this in mind.

Your wine cooler needs adequate space around the contents inside for it to function properly. It is very important that you give it 2 inches of space between the wine bottles and the inner wall surfaces, behind, and to the sides. This is necessary so that your wine cooler has adequate space for ventilation.

Installation Instructions

Installation instructions are located on the back of the wall mount paper.

8

W W W . V I N O T E M P . C O M

Image 8
Contents N E C O O L E R Page Your Wine Cooler Serving WinesTable of Contents Important Safety Instructions Read ALL Instructions Before Using this Wine CoolerCabinet Diagram Cabinet Specifications VT-6TED-WBInstallation Notes Electrical ConnectionCooling Speed Using the Buttons on the Display Panel Operating Your Wine CoolerCare and Maintenance Moving Your Wine Cellar Problems with Your Wine Cooler Troubleshooting GuideTerms of Sale and Warranty Page Service & Important Notice