OPERATING INSTRUCTIONS
1.Gently place/slide the racks in the cooler.
2.Determine the best temperature setting to use.
3.Place bottles and cans inside the cooler.
4.Plug the power cord into a standard electrical outlet.
5.Limit the frequency of opening the door to conserve energy and maintain proper storage temperature.
6.You can turn the interior light on and off by touching the button labeled “Light” on the front control panel.
Important: When using the cooler for the first time, allow at least 24 hours for the internal temperature to adjust properly. Make sure there are at least 6 to 12 bottles in the unit.
TEMPERATURE CONTROL
Important: In order to operate efficiently, this product should be in an environment with an ambient temperature of less than 90°F (32°C).
Temperature preset:
For your convenience, the beverage cooler is programmed at storing temperature. The temperature
Setting the temperature control (manually):
To manually adjust the temperature, simply press the control panel to decrease the temperature and the 
the temperature in 1 degree increments inside temperature range is from 40°F (4°C) to 65°F (18°C).
button on the button to increase the cooler. The
When the cabinet temperature is too low the LED will display “LL”. When the temperature is too high it will display “HH”. The “ER” display shows when there has been a power disruption.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1 | 7 |
i n f o @ v i n o t e m p . c o m |
|