Xerox HS1621 manual Precautions and tips, General safety, Disposal

Page 7

Precautions and tips

!The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following

Community Directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;

-2002/96/CE..

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.

The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

Do not touch the appliance with bare feet or with wet or moist hands and feet.

Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.

When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.

Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on(appliance off) to eliminate all electrical contact.

In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.

Do not use any sharp or pointed utensils or electrical equipment - other than the type recommended by the manufacturer - inside the frozen food storage compartments.

Do not put ice cubes taken directly from the freezer into your mouth.

Do not allow children to tamper with the controls or play with the appliance. Under no circumstance should they be allowed to sit on the bins or to hang from the door.

Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

Disposal

GB

Observe local environmental standards when disposing packaging material for recycling purposes.

En base a la Norma europea 2002/96/CE de Residuos de aparatos Eléctricos y Electrónicos (RAEE), los electrodomésticos viejos no pueden ser arrojados en los contenedores municipales habituales; tienen que ser recogidos selectivamente para optimizar la recuperación y reciclado de los componentes y materiales que los constituyen, y reducir el impacto en la salud humana y el medioambiente. El símbolo del cubo de basura tachado se marca sobre todos los productos para recordar al consumidor la obligación de separarlos para la recogida selectiva. El consumidor debe contactar con la autoridad local o con el vendedor para informarse en relación a la correcta eleminación de su electrodoméstico viejo.

Respecting and conserving the environment

Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.

Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.

Do not fill the appliance with too much food:

cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.

Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.

Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.

Regularly check the door seals and wipe clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

7

Image 7
Contents Operating Instructions ContentsPositioning and connection InstallationFitting a new plug Fruit Description of the applianceOverall view With EGG TrayStarting the appliance Using the refrigerator to its full potentialSetting the temperature Start-up and useAvoiding mould and unpleasant odours Maintenance and careSwitching the appliance off Cleaning the applianceRespecting and conserving the environment Precautions and tipsGeneral safety DisposalMalfunctions Possible causes / Solutions TroubleshootingPage Page Guarantee Hotpoint Service After Sales Service

HS1621 specifications

The Xerox HS1621 is an advanced high-speed digital printing solution designed to meet the dynamic demands of modern printing environments. This printer stands out for its robust performance, exceptional print quality, and a host of innovative features that make it a preferred choice for businesses looking to enhance their printing capabilities.

One of the key features of the HS1621 is its impressive print speed, which can reach up to 162 pages per minute. This rapid output is complemented by a high monthly duty cycle, enabling organizations to handle large volumes of printing without compromising quality. The HS1621 supports a variety of media types and sizes, making it versatile enough to accommodate different printing jobs, whether it be brochures, reports, or marketing materials.

The HS1621 utilizes advanced LED technology, which not only contributes to its high-speed printing but also ensures crisp and clear image quality. The resolution can reach up to 1200 x 1200 dpi, producing vibrant colors and sharp text that meet the expectations of even the most discerning clients. This makes the HS1621 ideal for applications requiring high fidelity, such as high-end marketing collaterals.

Another noteworthy characteristic of the HS1621 is its integrated workflow solutions. The printer comes equipped with features that facilitate seamless connectivity and efficient operation. It supports various file formats and can be easily integrated into existing networks. With built-in software utilities, users can manage print jobs more effectively, ensuring that tasks are completed swiftly and securely.

Security is also a priority for the HS1621, which offers robust encryption and user authentication features to protect sensitive data. This is particularly important for organizations handling confidential documents, as it helps mitigate the risk of unauthorized access or data breaches.

In terms of sustainability, the HS1621 is designed with energy-efficient technologies that minimize its environmental impact. It features an eco-mode that reduces energy consumption during idle times and incorporates duplex printing capabilities to reduce paper waste.

Overall, the Xerox HS1621 represents a comprehensive solution for high-volume printing needs, combining speed, quality, efficiency, and security in a single, powerful device. For businesses looking to invest in a reliable and adaptable printing solution, the HS1621 stands out as an exemplary choice.